描述
PA12导电复合碳纤维10%
（1）优异的机械强度
（2）耐油、燃料和溶剂
（3）良好的耐磨性
（4）耐候性
（5）良好的尺寸精度
（6）优于平均耐热性
PA12导电复合碳纤维10%
产品细节
PA12的特点：
1高冲击强度
<2良好的耐候性
<3良好的耐化学环境性
<4由于表面滑动特性而具有优异的耐磨性
<5小吸水性，因此，尺寸稳定性良好。
6比重是市售聚酰胺中最小的。
7低温冲击强度优良。
8抗气性良好。
1。比重小，吸水率低，吸水后物理性能变化小，成型温度范围大，产品尺寸稳定，低温冲击强度高，耐候性好 3，优异的耐油性和耐化学性、油脂、汽油、燃油、各种液体、金属盐溶液等。 4，良好的自润滑性、优异的耐磨性、优异的抗疲劳性 5。与其他高性能聚合物部门开发的其他材料一样，具有优异的加工性能 PA12的典型应用范围： 水表、自动喷水灭火系统（尺寸稳定性/防潮/防紫外线）、光学织物和电线护套（耐磨/防白蚁/防齿状动物/介电稳定/易于加工）， 2。球拍盖（良好的抗冲击性/耐候性/耐磨性/易染色/易加工）， 3。机械凸轮、滑动机构和轴承、洗衣机零件（用金属封闭）手动工具手柄（高绝缘/压力/冲击/易于加工）， 4。汽油连接管（耐油/耐酸碱/耐化学/耐腐蚀）绘图打印头（耐磨/耐冲击/柔性/耐酸碱） PA12注塑成型工艺条件 干燥处理：加工前湿度应低于0.1%。如果材料储存在空气中，建议在85℃的热风中干燥4至5小时。如果材料储存在密闭容器中，则可在温度平衡3小时后直接使用 PA12尼龙12弹性体具有优良的噪声和振动阻尼性能，在干燥运行条件下，对钢、POM、PBT和其他材料具有低滑动摩擦系数、优异的耐磨性和高体积稳定性。由于这些特性，该产品特别适用于无声齿轮，如DVD、CD、MDs、VCR、摄像机、数码相机、打印机和录像机 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< (1)excellent mechanical strengthPA12 Conductive Compound Carbon Fiber 10%
(2)resistance to oils, fuels, and solvents
(3)good resistance to wear
(4)weather-resistance
(5)good dimensional accuracy
(6)better than average heat-resistance
PA12 Conductive Compound Carbon Fiber 10%
Product Details
PA12 features:
1 high impact strength
2 good weather resistance
3 Good resistance to chemical environment
4 Excellent wear resistance due to surface slip characteristics
5 small water absorption, so the dimensional stability is good
6 Specific gravity is the smallest of commercially available polyamides
7 Excellent impact strength at low temperatures
8 gas resistance is good
PA12 advantages:
1. Small specific gravity, low water absorption, little change in physical properties after water absorption
2, the molding temperature range is large, the product size is stable, the low temperature impact strength is
high, and the weather resistance is good.
3, excellent oil and chemical resistance, grease, gasoline, fuel oil, various liquids, metal salt solutions, etc.
4, good self-lubricating, excellent wear resistance, excellent fatigue resistance
5. Excellent processing performance like other materials developed by other high performance polymer divisions.
PA12 Typical application range:
Water meter, automatic sprinkler system (size stability / moisture resistance / UV resistance), optical woven
and wire sheath (wear-resistant / termite-proof / anti-toothed animal / dielectric stable / easy to process),
2. Racket cover (good impact resistance / weather resistance / abrasion resistance / easy dyeing / easy processing),
3. Mechanical cam, sliding mechanism and bearing, washing machine parts (closed with metal) hand tool grip
skin (high insulation / pressure / impact / easy processing),
4. Gasoline connecting pipe (oil/acid and alkali resistant/chemical/corrosion resistant) drawing printer head
(wearing/impact resistant/flexible/acid and alkali resistant).
PA12 injection molding process conditions
Drying treatment: The humidity should be below 0.1% before processing. If the material is stored in the air, it is
recommended to dry in 85C hot air for 4 to 5 hours. If the material is stored in a closed container, it can be
used directly after 3 hours of temperature equilibration.
PA12 Nylon 12 elastomer has excellent noise and vibration damping properties, and has low sliding friction
coefficient, excellent wear resistance and high volume stability for steel, POM, PBT and other materials under
dry running conditions. Because of these properties, the product is particularly suitable for silent gears such as
DVDs, CDs, MDs, VCRs, camcorders, digital cameras, printers and video recorders.
评价
目前还没有评价