描述

PET空调出口用聚对苯二甲酸乙二醇酯GF10材料

PET材料的优势

1。出厂价格，质量稳定

2。成本低，模具性能好

三,。优异的耐水性和耐热性

四,。平衡的机械性能

五,。优异的电气性能

六,。可提供免费样品

七,。符合UL 94 V-0易燃性标准

PET调节出口用聚对苯二甲酸乙二醇酯GF10材料

产品详细信息

用于PET调节出口的聚对苯二甲酸乙二醇酯GF10材料

PET分为纤维级聚酯切片和非纤维级聚酯切片。① 纤维级聚酯用于制造涤纶短纤维和涤纶长丝，是聚酯纤维企业加工纤维及相关产品的原料。聚酯是化学纤维中品种最多的。②非纤维级聚酯也用于瓶子和薄膜，广泛应用于包装、电子、医疗卫生、建筑、汽车等领域。其中，包装是聚酯最大的非纤维应用市场，也是增长最快的PET快速领域

优点。具有良好的机械性能，冲击强度是其他薄膜的3至5倍，耐折叠性好

2。耐油、脂肪、稀酸和碱，耐大多数溶剂

3。纯PET的耐热性不高，热变形温度仅为85℃左右，但经强化处理后，热变形温度大大提高。玻璃纤维增强PET的力学性能与PC、PA等工程塑料相近，热变形温度可达225℃；PET具有良好的耐热老化性能，脆化温度为-70℃，在-30℃下仍有一定的韧性；PET不易燃烧，火焰呈黄色，燃烧的油滴

4。气体和水蒸气的渗透性低，具有良好的气体阻隔性、水、油和气味特性

5。透明度高，能阻挡紫外线，光泽度好

6。无毒、无味、卫生安全性好，可直接用于食品包装

应用：PET汽车空调出风口

Polyethylene Terephthalate GF10 Material For PET Conditioning Outlet

.
PET Material Advantages
1. Factory price with stable quality
2. Low-cost and high Mold-ability.
3. Excellent Water Resistance and Heat Resistance.
4. Balanced Mechanical properties.
5. Excellent Electrical properties.
6. Free sample can be provided.
7. Conforms to UL 94 V-0 Flammability Standards.

Polyethylene Terephthalate GF10 Material For PET Conditioning Outlet

Product Details

Polyethylene terephthalate GF10 Material For PET Conditioning Outlet

PET is divided into fiber grade polyester chips and non-fiber grade polyester chips. ① Fiber grade polyester is used to manufacture polyester staple fiber and polyester filament, and is the raw material for polyester fiber enterprises to process fibers and related products. Polyester is the largest variety among chemical fibers. ②Non-fiber grade polyesters are also used in bottles and films, and are widely used in packaging, electronics, medical and health, construction, automotive and other fields. Among them, packaging is the largest non-fiber application market for polyester, and it is also the fastest growing PET Fast field.

Advantages

1. Has good mechanical properties, impact strength is 3 to 5 times that of other films, good folding resistance.

2. Resistant to oil, fat, dilute acid and alkali, and resistant to most solvents.

3. The heat resistance of pure PET is not high, and the heat distortion temperature is only about 85 ℃, but it is greatly improved after enhanced treatment. The mechanical properties of PET reinforced with glass fiber are similar to engineering plastics such as PC and PA, and the heat deformation temperature can reach 225 ℃; PET has good heat aging resistance, the embrittlement temperature is -70 ℃, and it still has a certain temperature at -30 ℃ Toughness; PET is not easy to burn, the flame is yellow, and the burning oil drops.

4. Low permeability of gas and water vapor, it has excellent gas barrier, water, oil and odor properties.

5. High transparency, can block ultraviolet rays, good gloss.

6. Non-toxic, odorless, good hygiene and safety, can be directly used for food packaging.

Application: PET Auto air conditioning outlet