描述
1500熔喷PP材料高流动性医用级产品：1500熔喷PP材料高流动性医用级产品。超高流量
2。窄分子量分布
3。低气味
1500熔喷PP材料高流动性医用级
产品详细信息
1500熔喷聚丙烯材料高流动性医用级。医用卫生材料1500熔喷聚丙烯材料高流动医用级。保温过滤材料1500熔喷PP材料高流动性医用级。汽车吸音材料1500熔喷PP材料高流动性医用级驻极体母料（驻极体母料）是一种特殊功能母料，与驻极体设备一起使用。在全球疫情迅速蔓延的情况下，熔喷织物的市场需求激增。随着95和99熔喷织物产量的大幅增加，作为生产熔喷织物的重要原材料之一，高端驻极体母粒的生产能力也开始恐慌
驻极体母料，型号：ZJ228，基于进口高流动性聚丙烯（溶解指数）≥1300/分钟），采用高性能复合型驻极体，并进行均匀混合基本生产，解决了单一驻极体材料难以分散和不稳定的问题。这是一种驻极体母料，已通过客户群认证，具有优异的性能和稳定的质量
作用原理：
由分散剂复合的微米粉末。它具有产生电离子储存电荷的功能。在引发剂的作用下，镁锂电气石释放电荷、空气负离子，提高口罩静电吸附和消毒负离子的能力，有效阻止微米以下的水滴、灰尘和病毒
驻极体加热加压后，镁锂电气石的性能将进一步增强。温度每升高10度，效果就会加倍，细度越细，产生的静电越多，吸附能力也会增强
1500熔喷PP材料高流动性医用级添加驻极体母料效果：
添加少量驻极体母料可以增加熔喷非织造布中电荷俘获能阱的密度和深度，有效释放负离子和储存电荷，提高熔喷非织造布的综合过滤效果和热衰减。表演在纤维细度和克重相同的情况下，可以降低熔喷无纺布产品的阻力，同时提高熔喷无纺布产品的过滤效果
防病毒口罩包括医用外科口罩和N95口罩。国家YY 0469-2004《医用外科口罩技术要求》标准规定，医用外科口罩必须达到的重要技术指标包括过滤效率、细菌过滤效率和呼吸阻力：
1：过滤效率：在气流（30±2）L/min的条件下，空气动力中值直径（0.24±0.06）μm氯化钠气溶胶的过滤效率不低于30%
2：细菌过滤效率：在规定条件下，平均粒径为（3±0.3）μm的金黄色葡萄球菌气溶胶的过滤效率不低于95%
3：呼吸阻力：在过滤效率流量条件下，吸入阻力不超过49Pa，呼气阻力不超过29.4Pa
其中，确保细菌过滤效果的第二个标准是第二个。金黄色葡萄球菌细菌气溶胶过滤效率不低于95%，这是N95概念的起源。因此，N95口罩虽然不是医用口罩，但它的过滤效率达到了95%的标准，能更好地贴合人脸，因此它也能起到很好的防病毒作用
将病毒过滤带到这两个口罩上的主要材料是非常精细的静态内滤布熔喷非织造布
有关1500种熔喷PP材料高流动医用级的更多详细信息，请立即联系
林婷娜
1500 Meltblown PP Material High Flow Medical Grade
Product : 1500 meltblown PP material high flow medical grade
1. Super High Flow
2. Narrow molecular weight distribution
3. Low odor
1500 Meltblown PP Material High Flow Medical Grade
Product Details
1500 meltblown PP material high flow medical grade
Typical application
1. Medical hygiene materials1500 meltblown PP material high flow medical grade
2. Keep warm and filter material1500 meltblown PP material high flow medical grade
3. Car sound-absorbing material1500 meltblown PP material high flow medical grade
The electret masterbatch (Electret masterbatch) is a special function masterbatch used in conjunction with electret equipment. Under the rapid spread of the global epidemic, the market demand for meltblown fabrics has surged. With the production of 95 and 99 meltblown fabrics As a result of the substantial increase in production, as one of the important raw materials for the production of meltblown fabrics, the production capacity of high-end electret masterbatches has also begun to panic.
Electret masterbatch, model: ZJ228, is based on imported high-flow polypropylene (dissolving index ≥1300 / min), uses high-performance compound type electret, and performs uniform mixing basic production, solving a single electret The problem that the material is difficult to disperse and unstable. It is an electret masterbatch that has been certified by customer groups, has excellent performance and stable quality.
Principle of action:
Micron powder compounded by dispersant. It has the function of producing electric ions to store charge. Under the action of an initiator, magnesium lithium tourmaline releases charge, air negative ions, increases the ability of masks to adsorb electrostatically and sterilize negative ions, and effectively blocks droplets, dust, and viruses below microns.
After the electret is heated and pressurized, the performance of the magnesium-lithium tourmaline will be further strengthened. The effect is doubled for every ten degrees of temperature increase, and the finer the fineness, the more static electricity is generated and the adsorption capacity is also enhanced.
1500 meltblown PP material high flow medical grade Add electret masterbatch effect:
Adding a small amount of electret masterbatch can increase the density and depth of the charge trapping energy trap in the melt-blown non-woven fabric, effectively release negative ions and store charge, and improve the comprehensive filtration effect and thermal attenuation of the melt-blown non-woven fabric. Performance. In the case of the same fiber fineness and gram weight, it can reduce the resistance of the melt-blown non-woven product, and at the same time improve the filtration effect of the melt-blown non-woven product.
Virus protection masks include medical surgical masks and N95 masks. National YY 0469-2004 “Technical Requirements for Medical Surgical Masks” standard stipulates that important technical indicators that medical surgical masks must achieve include filtration efficiency, bacterial filtration efficiency and respiratory resistance:
1: Filtration efficiency: Under the condition of air flow (30 ± 2) L / min, the filtration efficiency of aerodynamic median diameter (0.24 ± 0.06) μm sodium chloride aerosol is not less than 30%.
2: Bacterial filtration efficiency: Under the specified conditions, the filtration efficiency of the aerosol of Staphylococcus aureus with an average particle diameter of (3 ± 0.3) μm is not less than 95%;
3: Breathing resistance: Under the condition of filtration efficiency flow rate, the inhalation resistance does not exceed 49Pa, and the exhalation resistance does not exceed 29.4Pa.
Among them, the second criterion for ensuring the filtration effect of bacteria is the second. Staphylococcus aureus bacterial aerosol filtration efficiency is not less than 95%, which is the origin of the concept of N95. Therefore, although the N95 mask is not a medical mask, it meets the standard of filtering efficiency of 95%, and can better fit the human face, so it can also play a good role in virus prevention.
The main material that brings virus filtering to these two masks is the very fine and static inner filter cloth-meltblown nonwoven fabric.
Contact now for more details about 1500 meltblown PP material high flow medical grade.
Tina Lin<###>
驻极体母料（驻极体母料）是一种特殊功能母料，与驻极体设备一起使用。在全球疫情迅速蔓延的情况下，熔喷织物的市场需求激增。随着95和99熔喷织物产量的大幅增加，作为生产熔喷织物的重要原材料之一，高端驻极体母粒的生产能力也开始恐慌
驻极体母料，型号：ZJ228，基于进口高流动性聚丙烯（溶解指数）≥1300/分钟），采用高性能复合型驻极体，并进行均匀混合基本生产，解决了单一驻极体材料难以分散和不稳定的问题。这是一种驻极体母料，已通过客户群认证，具有优异的性能和稳定的质量
作用原理：
由分散剂复合的微米粉末。它具有产生电离子储存电荷的功能。在引发剂的作用下，镁锂电气石释放电荷、空气负离子，提高口罩静电吸附和消毒负离子的能力，有效阻止微米以下的水滴、灰尘和病毒
驻极体加热加压后，镁锂电气石的性能将进一步增强。温度每升高10度，效果就会加倍，细度越细，产生的静电越多，吸附能力也会增强
1500熔喷PP材料高流动性医用级添加驻极体母料效果：
添加少量驻极体母料可以增加熔喷非织造布中电荷俘获能阱的密度和深度，有效释放负离子和储存电荷，提高熔喷非织造布的综合过滤效果和热衰减。表演在纤维细度和克重相同的情况下，可以降低熔喷无纺布产品的阻力，同时提高熔喷无纺布产品的过滤效果
防病毒口罩包括医用外科口罩和N95口罩。国家YY 0469-2004《医用外科口罩技术要求》标准规定，医用外科口罩必须达到的重要技术指标包括过滤效率、细菌过滤效率和呼吸阻力：
1：过滤效率：在气流（30±2）L/min的条件下，空气动力中值直径（0.24±0.06）μm氯化钠气溶胶的过滤效率不低于30%
2：细菌过滤效率：在规定条件下，平均粒径为（3±0.3）μm的金黄色葡萄球菌气溶胶的过滤效率不低于95%
3：呼吸阻力：在过滤效率流量条件下，吸入阻力不超过49Pa，呼气阻力不超过29.4Pa
其中，确保细菌过滤效果的第二个标准是第二个。金黄色葡萄球菌细菌气溶胶过滤效率不低于95%，这是N95概念的起源。因此，N95口罩虽然不是医用口罩，但它的过滤效率达到了95%的标准，能更好地贴合人脸，因此它也能起到很好的防病毒作用
将病毒过滤带到这两个口罩上的主要材料是非常精细的静态内滤布熔喷非织造布
有关1500种熔喷PP材料高流动医用级的更多详细信息，请立即联系
林婷娜
1500 Meltblown PP Material High Flow Medical Grade
Product : 1500 meltblown PP material high flow medical grade
1. Super High Flow
2. Narrow molecular weight distribution
3. Low odor
1500 Meltblown PP Material High Flow Medical Grade
Product Details
1500 meltblown PP material high flow medical grade
Typical application
1. Medical hygiene materials1500 meltblown PP material high flow medical grade
2. Keep warm and filter material1500 meltblown PP material high flow medical grade
3. Car sound-absorbing material1500 meltblown PP material high flow medical grade
The electret masterbatch (Electret masterbatch) is a special function masterbatch used in conjunction with electret equipment. Under the rapid spread of the global epidemic, the market demand for meltblown fabrics has surged. With the production of 95 and 99 meltblown fabrics As a result of the substantial increase in production, as one of the important raw materials for the production of meltblown fabrics, the production capacity of high-end electret masterbatches has also begun to panic.
Electret masterbatch, model: ZJ228, is based on imported high-flow polypropylene (dissolving index ≥1300 / min), uses high-performance compound type electret, and performs uniform mixing basic production, solving a single electret The problem that the material is difficult to disperse and unstable. It is an electret masterbatch that has been certified by customer groups, has excellent performance and stable quality.
Principle of action:
Micron powder compounded by dispersant. It has the function of producing electric ions to store charge. Under the action of an initiator, magnesium lithium tourmaline releases charge, air negative ions, increases the ability of masks to adsorb electrostatically and sterilize negative ions, and effectively blocks droplets, dust, and viruses below microns.
After the electret is heated and pressurized, the performance of the magnesium-lithium tourmaline will be further strengthened. The effect is doubled for every ten degrees of temperature increase, and the finer the fineness, the more static electricity is generated and the adsorption capacity is also enhanced.
1500 meltblown PP material high flow medical grade Add electret masterbatch effect:
Adding a small amount of electret masterbatch can increase the density and depth of the charge trapping energy trap in the melt-blown non-woven fabric, effectively release negative ions and store charge, and improve the comprehensive filtration effect and thermal attenuation of the melt-blown non-woven fabric. Performance. In the case of the same fiber fineness and gram weight, it can reduce the resistance of the melt-blown non-woven product, and at the same time improve the filtration effect of the melt-blown non-woven product.
Virus protection masks include medical surgical masks and N95 masks. National YY 0469-2004 “Technical Requirements for Medical Surgical Masks” standard stipulates that important technical indicators that medical surgical masks must achieve include filtration efficiency, bacterial filtration efficiency and respiratory resistance:
1: Filtration efficiency: Under the condition of air flow (30 ± 2) L / min, the filtration efficiency of aerodynamic median diameter (0.24 ± 0.06) μm sodium chloride aerosol is not less than 30%.
2: Bacterial filtration efficiency: Under the specified conditions, the filtration efficiency of the aerosol of Staphylococcus aureus with an average particle diameter of (3 ± 0.3) μm is not less than 95%;
3: Breathing resistance: Under the condition of filtration efficiency flow rate, the inhalation resistance does not exceed 49Pa, and the exhalation resistance does not exceed 29.4Pa.
Among them, the second criterion for ensuring the filtration effect of bacteria is the second. Staphylococcus aureus bacterial aerosol filtration efficiency is not less than 95%, which is the origin of the concept of N95. Therefore, although the N95 mask is not a medical mask, it meets the standard of filtering efficiency of 95%, and can better fit the human face, so it can also play a good role in virus prevention.
The main material that brings virus filtering to these two masks is the very fine and static inner filter cloth-meltblown nonwoven fabric.
Contact now for more details about 1500 meltblown PP material high flow medical grade.
Tina Lin<###>
评价
目前还没有评价