描述
用于渔具卷筒的高耐磨PBT
用于渔具卷筒的高耐磨PBT
聚对苯二甲酸丁二醇酯塑料树脂，
用于注射/挤出级的PBT树脂，
颜色可选，
优点高抗冲击性，易于成型，
玻璃纤维增强碳纤维增强，
阻燃级，增韧级，
包装25公斤/袋（也可定制）
渔具卷筒用高耐磨PBT
产品详细信息材质 渔具卷筒用高耐磨PBTModle
KY-TR4001 类型 颗粒、颗粒、塑料树脂、夹子、颗粒 填充 玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等 颜色 根据需要 填充内容 5%-60% 抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等 钓具卷筒用高耐磨PBT注塑工艺：干燥处理：这种材料在高温下容易水解，因此加工前的干燥处理非常重要。建议在空气中干燥6~8小时的温度为120°C，或2~4小时的温度为150°C。湿度必须小于0.03%。如果使用吸湿干燥器进行干燥，建议在150°C温度下干燥2.5小时
渔具卷筒用高耐磨PBTModle
模具温度：无加强材料为40~60℃。模具的冷却腔应设计良好，以减少塑料零件的弯曲。热损失必须迅速且均匀。建议模具冷却通道的直径为12mm
注射压力：中等（高达1500巴）
渔具卷筒用高耐磨PBT的更多细节如果您对纽约感兴趣，请与我联系，我们将进一步讨论，并发送我们的专业计划供您参考
立即联系：特蕾西
High Wear Resistance PBT For Fishing Tackle Reel
High wear resistance PBT for fishing tackle reel
polybutylene terephthalate plastic resin,
PBT resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).
High Wear Resistance PBT For Fishing Tackle Reel
Product Details
| Material | High wear resistance PBT for fishing tackle reel |
| Modle | KY-TR4001 |
| Type | granules，pellets，plastic resin,clips,particle. |
| Filler | glass fiber , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
High wear resistance PBT for fishing tackle reel
PBT injection molding process:
Drying treatment: This material is easily hydrolyzed at high temperatures, so the drying treatment before processing is very important. The recommended drying condition in the air is 120°C for 6~8 hours, or 150°C for 2~4 hours. The humidity must be less than 0.03%. If you use a moisture-absorbing dryer to dry, the recommended conditions are 150°C for 2.5 hours.
Melting temperature: 225~275℃, recommended temperature: 250℃.
Mold temperature: 40~60℃ for unreinforced materials. The cooling cavity of the mold should be well designed to reduce the bending of the plastic part. The heat loss must be fast and even. It is recommended that the diameter of the mold cooling channel is 12mm.
Injection pressure: medium (up to 1500bar).
Injection speed: The fastest possible injection speed should be used (because PBT solidifies quickly).
More detail of High wear resistance PBT for fishing tackle reel.Any interested in, pls kindly contact with me, we will talk further and send you our professional plan for your reference.
评价
目前还没有评价