描述
丙烯腈-丁二烯-苯乙烯塑料1
建筑装饰业
交通运输业、广告业
电气、化工机械、汽车业
丙烯腈-丁二烯-苯乙烯塑料1
产品细节
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<化学名称：丙烯腈-丁二烯-苯乙烯共聚物的英文名称：丙烯腈-丁二烯-苯乙烯共聚物比重：1.05g/cm3模塑收缩率：0.4-0.7%模塑温度：200-240℃干燥条件：80-90℃2小时。整体性能好，冲击强度高，化学稳定性好，电气性能好
2。它与372有机玻璃具有良好的焊接性，由双色塑料件制成，表面可镀铬和喷漆
3。有高抗冲击性、高耐热性、阻燃性、增强性、透明性等等级
4。流动性比HIPS稍差，比PMMA、PC等好，柔韧性好
用途：适用于制造一般机械零件、耐磨损零件、传动零件和通讯零件
成型特性：
1。无定形材料，中等流动性，高吸湿性，必须完全干燥。表面需要光泽的塑料零件必须在80-90度下预热并干燥3小时
2。建议采用较高的材料温度和模具温度，但材料温度过高且容易分解（分解温度>270度）。对于精度更高的塑料零件，模具温度应为50-60度，以抵抗高光泽。对于热塑性零件，模具温度应为60-80度
3。如果需要解决积水问题，则需要提高材料的流动性，采用高材料温度、高模具温度或改变水位等方法
4。如果形成耐热或阻燃材料，生产3-7天后，塑料分解产物将留在模具表面，这将导致模具表面发亮。模具需要及时清洗，模具表面需要排气
联系我们
Acrylonitrile Butadiene Styrene Plastic1
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
Acrylonitrile Butadiene Styrene Plastic1
Product Details
Acrylonitrile Butadiene Styrene plastic
ABS plastic
Chemical name: Acrylonitrile-butadiene-styrene copolymer
English name: Acrylonitrile Butadiene Styrene
Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.4-0.7%
Molding temperature: 200-240℃ Drying conditions: 80-90℃ 2 hours
Features:
1.Good overall performance, high impact strength, chemical stability, and good electrical properties.
2.It has good weldability with 372 plexiglass and is made of two-color plastic parts, and the surface can be chrome-plated and painted.
3. There are high impact resistance, high heat resistance, flame retardant, reinforced, transparent and other levels.
4. The fluidity is a little worse than HIPS, better than PMMA, PC, etc., and it has good flexibility.
Uses: suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunications parts.
Molding characteristics:
1.Amorphous material, medium fluidity, high moisture absorption, and must be fully dried.Plastic parts that require gloss on the surface must be preheated and dried for a long time at 80-90 degrees for 3 hours.
2. It is advisable to take high material temperature and high mold temperature, but the material temperature is too high and easy to decompose (the decomposition temperature is >270 degrees). For plastic parts with higher precision, the mold temperature should be 50-60 degrees, which is resistant to high gloss. For thermoplastic parts, the mold temperature should be 60-80 degrees.
3. If you need to solve the water trapping, you need to improve the fluidity of the material, adopt high material temperature, high mold temperature, or change the water level and other methods.
4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, which will cause the surface of the mold to shine. The mold needs to be cleaned in time, and the mold surface needs to be exhausted.
ContactnowformoredetailsaboutAcrylonitrile Butadiene Styrene.
Kitty Liu< ###>
is one of the professional acrylonitrile butadiene styrene plastic1 manufacturers, you can order high quality acrylonitrile butadiene styrene plastic1 at good price from our factory.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<化学名称：丙烯腈-丁二烯-苯乙烯共聚物的英文名称：丙烯腈-丁二烯-苯乙烯共聚物比重：1.05g/cm3模塑收缩率：0.4-0.7%模塑温度：200-240℃干燥条件：80-90℃2小时。整体性能好，冲击强度高，化学稳定性好，电气性能好
2。它与372有机玻璃具有良好的焊接性，由双色塑料件制成，表面可镀铬和喷漆
3。有高抗冲击性、高耐热性、阻燃性、增强性、透明性等等级
4。流动性比HIPS稍差，比PMMA、PC等好，柔韧性好
用途：适用于制造一般机械零件、耐磨损零件、传动零件和通讯零件
成型特性：
1。无定形材料，中等流动性，高吸湿性，必须完全干燥。表面需要光泽的塑料零件必须在80-90度下预热并干燥3小时
2。建议采用较高的材料温度和模具温度，但材料温度过高且容易分解（分解温度>270度）。对于精度更高的塑料零件，模具温度应为50-60度，以抵抗高光泽。对于热塑性零件，模具温度应为60-80度
3。如果需要解决积水问题，则需要提高材料的流动性，采用高材料温度、高模具温度或改变水位等方法
4。如果形成耐热或阻燃材料，生产3-7天后，塑料分解产物将留在模具表面，这将导致模具表面发亮。模具需要及时清洗，模具表面需要排气
联系我们
Acrylonitrile Butadiene Styrene Plastic1
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
Acrylonitrile Butadiene Styrene Plastic1
Product Details
Acrylonitrile Butadiene Styrene plastic
ABS plastic
Chemical name: Acrylonitrile-butadiene-styrene copolymer
English name: Acrylonitrile Butadiene Styrene
Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.4-0.7%
Molding temperature: 200-240℃ Drying conditions: 80-90℃ 2 hours
Features:
1.Good overall performance, high impact strength, chemical stability, and good electrical properties.
2.It has good weldability with 372 plexiglass and is made of two-color plastic parts, and the surface can be chrome-plated and painted.
3. There are high impact resistance, high heat resistance, flame retardant, reinforced, transparent and other levels.
4. The fluidity is a little worse than HIPS, better than PMMA, PC, etc., and it has good flexibility.
Uses: suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunications parts.
Molding characteristics:
1.Amorphous material, medium fluidity, high moisture absorption, and must be fully dried.Plastic parts that require gloss on the surface must be preheated and dried for a long time at 80-90 degrees for 3 hours.
2. It is advisable to take high material temperature and high mold temperature, but the material temperature is too high and easy to decompose (the decomposition temperature is >270 degrees). For plastic parts with higher precision, the mold temperature should be 50-60 degrees, which is resistant to high gloss. For thermoplastic parts, the mold temperature should be 60-80 degrees.
3. If you need to solve the water trapping, you need to improve the fluidity of the material, adopt high material temperature, high mold temperature, or change the water level and other methods.
4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, which will cause the surface of the mold to shine. The mold needs to be cleaned in time, and the mold surface needs to be exhausted.
ContactnowformoredetailsaboutAcrylonitrile Butadiene Styrene.
Kitty Liu< ###>
is one of the professional acrylonitrile butadiene styrene plastic1 manufacturers, you can order high quality acrylonitrile butadiene styrene plastic1 at good price from our factory.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<化学名称：丙烯腈-丁二烯-苯乙烯共聚物的英文名称：丙烯腈-丁二烯-苯乙烯共聚物比重：1.05g/cm3模塑收缩率：0.4-0.7%模塑温度：200-240℃干燥条件：80-90℃2小时。整体性能好，冲击强度高，化学稳定性好，电气性能好
2。它与372有机玻璃具有良好的焊接性，由双色塑料件制成，表面可镀铬和喷漆
3。有高抗冲击性、高耐热性、阻燃性、增强性、透明性等等级
4。流动性比HIPS稍差，比PMMA、PC等好，柔韧性好
用途：适用于制造一般机械零件、耐磨损零件、传动零件和通讯零件
成型特性：
1。无定形材料，中等流动性，高吸湿性，必须完全干燥。表面需要光泽的塑料零件必须在80-90度下预热并干燥3小时
2。建议采用较高的材料温度和模具温度，但材料温度过高且容易分解（分解温度>270度）。对于精度更高的塑料零件，模具温度应为50-60度，以抵抗高光泽。对于热塑性零件，模具温度应为60-80度
3。如果需要解决积水问题，则需要提高材料的流动性，采用高材料温度、高模具温度或改变水位等方法
4。如果形成耐热或阻燃材料，生产3-7天后，塑料分解产物将留在模具表面，这将导致模具表面发亮。模具需要及时清洗，模具表面需要排气
联系我们
Acrylonitrile Butadiene Styrene Plastic1
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
Acrylonitrile Butadiene Styrene Plastic1
Product Details
Acrylonitrile Butadiene Styrene plastic
ABS plastic
Chemical name: Acrylonitrile-butadiene-styrene copolymer
English name: Acrylonitrile Butadiene Styrene
Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.4-0.7%
Molding temperature: 200-240℃ Drying conditions: 80-90℃ 2 hours
Features:
1.Good overall performance, high impact strength, chemical stability, and good electrical properties.
2.It has good weldability with 372 plexiglass and is made of two-color plastic parts, and the surface can be chrome-plated and painted.
3. There are high impact resistance, high heat resistance, flame retardant, reinforced, transparent and other levels.
4. The fluidity is a little worse than HIPS, better than PMMA, PC, etc., and it has good flexibility.
Uses: suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunications parts.
Molding characteristics:
1.Amorphous material, medium fluidity, high moisture absorption, and must be fully dried.Plastic parts that require gloss on the surface must be preheated and dried for a long time at 80-90 degrees for 3 hours.
2. It is advisable to take high material temperature and high mold temperature, but the material temperature is too high and easy to decompose (the decomposition temperature is >270 degrees). For plastic parts with higher precision, the mold temperature should be 50-60 degrees, which is resistant to high gloss. For thermoplastic parts, the mold temperature should be 60-80 degrees.
3. If you need to solve the water trapping, you need to improve the fluidity of the material, adopt high material temperature, high mold temperature, or change the water level and other methods.
4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, which will cause the surface of the mold to shine. The mold needs to be cleaned in time, and the mold surface needs to be exhausted.
ContactnowformoredetailsaboutAcrylonitrile Butadiene Styrene.
Kitty Liu< ###>
is one of the professional acrylonitrile butadiene styrene plastic1 manufacturers, you can order high quality acrylonitrile butadiene styrene plastic1 at good price from our factory.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<化学名称：丙烯腈-丁二烯-苯乙烯共聚物的英文名称：丙烯腈-丁二烯-苯乙烯共聚物比重：1.05g/cm3模塑收缩率：0.4-0.7%模塑温度：200-240℃干燥条件：80-90℃2小时。整体性能好，冲击强度高，化学稳定性好，电气性能好
2。它与372有机玻璃具有良好的焊接性，由双色塑料件制成，表面可镀铬和喷漆
3。有高抗冲击性、高耐热性、阻燃性、增强性、透明性等等级
4。流动性比HIPS稍差，比PMMA、PC等好，柔韧性好
用途：适用于制造一般机械零件、耐磨损零件、传动零件和通讯零件
成型特性：
1。无定形材料，中等流动性，高吸湿性，必须完全干燥。表面需要光泽的塑料零件必须在80-90度下预热并干燥3小时
2。建议采用较高的材料温度和模具温度，但材料温度过高且容易分解（分解温度>270度）。对于精度更高的塑料零件，模具温度应为50-60度，以抵抗高光泽。对于热塑性零件，模具温度应为60-80度
3。如果需要解决积水问题，则需要提高材料的流动性，采用高材料温度、高模具温度或改变水位等方法
4。如果形成耐热或阻燃材料，生产3-7天后，塑料分解产物将留在模具表面，这将导致模具表面发亮。模具需要及时清洗，模具表面需要排气
联系我们
Acrylonitrile Butadiene Styrene Plastic1
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
Acrylonitrile Butadiene Styrene Plastic1
Product Details
Acrylonitrile Butadiene Styrene plastic
ABS plastic
Chemical name: Acrylonitrile-butadiene-styrene copolymer
English name: Acrylonitrile Butadiene Styrene
Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.4-0.7%
Molding temperature: 200-240℃ Drying conditions: 80-90℃ 2 hours
Features:
1.Good overall performance, high impact strength, chemical stability, and good electrical properties.
2.It has good weldability with 372 plexiglass and is made of two-color plastic parts, and the surface can be chrome-plated and painted.
3. There are high impact resistance, high heat resistance, flame retardant, reinforced, transparent and other levels.
4. The fluidity is a little worse than HIPS, better than PMMA, PC, etc., and it has good flexibility.
Uses: suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunications parts.
Molding characteristics:
1.Amorphous material, medium fluidity, high moisture absorption, and must be fully dried.Plastic parts that require gloss on the surface must be preheated and dried for a long time at 80-90 degrees for 3 hours.
2. It is advisable to take high material temperature and high mold temperature, but the material temperature is too high and easy to decompose (the decomposition temperature is >270 degrees). For plastic parts with higher precision, the mold temperature should be 50-60 degrees, which is resistant to high gloss. For thermoplastic parts, the mold temperature should be 60-80 degrees.
3. If you need to solve the water trapping, you need to improve the fluidity of the material, adopt high material temperature, high mold temperature, or change the water level and other methods.
4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, which will cause the surface of the mold to shine. The mold needs to be cleaned in time, and the mold surface needs to be exhausted.
ContactnowformoredetailsaboutAcrylonitrile Butadiene Styrene.
Kitty Liu< ###>
is one of the professional acrylonitrile butadiene styrene plastic1 manufacturers, you can order high quality acrylonitrile butadiene styrene plastic1 at good price from our factory.
模塑温度：200-240℃干燥条件：80-90℃2小时。整体性能好，冲击强度高，化学稳定性好，电气性能好
2。它与372有机玻璃具有良好的焊接性，由双色塑料件制成，表面可镀铬和喷漆
3。有高抗冲击性、高耐热性、阻燃性、增强性、透明性等等级
4。流动性比HIPS稍差，比PMMA、PC等好，柔韧性好
用途：适用于制造一般机械零件、耐磨损零件、传动零件和通讯零件
成型特性：
1。无定形材料，中等流动性，高吸湿性，必须完全干燥。表面需要光泽的塑料零件必须在80-90度下预热并干燥3小时
2。建议采用较高的材料温度和模具温度，但材料温度过高且容易分解（分解温度>270度）。对于精度更高的塑料零件，模具温度应为50-60度，以抵抗高光泽。对于热塑性零件，模具温度应为60-80度
3。如果需要解决积水问题，则需要提高材料的流动性，采用高材料温度、高模具温度或改变水位等方法
4。如果形成耐热或阻燃材料，生产3-7天后，塑料分解产物将留在模具表面，这将导致模具表面发亮。模具需要及时清洗，模具表面需要排气
联系我们
Acrylonitrile Butadiene Styrene Plastic1
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
Acrylonitrile Butadiene Styrene Plastic1
Product Details
Acrylonitrile Butadiene Styrene plastic
ABS plastic
Chemical name: Acrylonitrile-butadiene-styrene copolymer
English name: Acrylonitrile Butadiene Styrene
Specific gravity: 1.05 g/cm3 Mold shrinkage: 0.4-0.7%
Molding temperature: 200-240℃ Drying conditions: 80-90℃ 2 hours
Features:
1.Good overall performance, high impact strength, chemical stability, and good electrical properties.
2.It has good weldability with 372 plexiglass and is made of two-color plastic parts, and the surface can be chrome-plated and painted.
3. There are high impact resistance, high heat resistance, flame retardant, reinforced, transparent and other levels.
4. The fluidity is a little worse than HIPS, better than PMMA, PC, etc., and it has good flexibility.
Uses: suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunications parts.
Molding characteristics:
1.Amorphous material, medium fluidity, high moisture absorption, and must be fully dried.Plastic parts that require gloss on the surface must be preheated and dried for a long time at 80-90 degrees for 3 hours.
2. It is advisable to take high material temperature and high mold temperature, but the material temperature is too high and easy to decompose (the decomposition temperature is >270 degrees). For plastic parts with higher precision, the mold temperature should be 50-60 degrees, which is resistant to high gloss. For thermoplastic parts, the mold temperature should be 60-80 degrees.
3. If you need to solve the water trapping, you need to improve the fluidity of the material, adopt high material temperature, high mold temperature, or change the water level and other methods.
4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, which will cause the surface of the mold to shine. The mold needs to be cleaned in time, and the mold surface needs to be exhausted.
ContactnowformoredetailsaboutAcrylonitrile Butadiene Styrene.
Kitty Liu< ###>
is one of the professional acrylonitrile butadiene styrene plastic1 manufacturers, you can order high quality acrylonitrile butadiene styrene plastic1 at good price from our factory.
评价
目前还没有评价