描述

低翘曲聚甲醛玻璃珠25%增强

产品：低翘曲聚甲醛玻璃珠25%增强

高耐磨性

低摩擦系数

高耐热性

良好的电气和介电性能

低吸水性

低翘曲聚甲醛玻璃珠增强25%

产品详细信息低翘曲POM玻璃珠25%增强

（1）POM在干燥前无需干燥即可使用。在此过程中预热（约80°C），这有助于产品的尺寸稳定性

（3）注入聚甲醛材料时，应保持较高的压力（类似于注入压力），以减少压降。螺杆转速不宜过高，余量应较小

（6）机械强度高，刚性好，恢复性好，自润滑性好，耐磨性好，尺寸稳定性好

低warp POM玻璃珠增强25%应用：

可替代大多数有色金属、汽车、机床、仪表零件、轴承、紧固件、齿轮、弹簧、管道、输送带附件、电动水箱、泵壳、排水器、水龙头、，等。

现在就联系我们，让低翘曲POM玻璃珠增强25%

Low Warp POM Glass Beads 25% Enhanced

Product : Low warp POM glass beads 25% enhanced
High abrasion resistance
Low coefficient of friction
High heat resistance
Good electrical and dielectric properties
Low water absorption

Low Warp POM Glass Beads 25% Enhanced

Product Details

Low warp POM glass beads 25% enhanced

POM plastic raw material features:

(1) POM can be used without drying before drying. Preheat during this process (about 80°C), which is conducive to dimensional stability of the product.

(2) The processing temperature of POM is very narrow (0~215℃). When the residence time in the barrel is slightly longer or the temperature exceeds 220℃, it will decompose and produce irritating formaldehyde gas.

(3) When POM material is injected, the pressure should be maintained high (similar to injection pressure) to reduce pressure drop. Screw speed should not be too high, the allowance should be less;

(4) The product produced by POM has a large shrinkage rate, which is easy to produce shrinkage or deformation. POM specific heat is high, the mold temperature is high (80~100°C), the product is very hot when demoulding, and it is necessary to prevent finger burns.

(5) POM should be formed under the conditions of “medium pressure, medium speed, low material temperature and high mold temperature”, and the mold temperature should be controlled when molding precision products.

(6) High mechanical strength, good rigidity

(7) High fatigue strength

(8) good environmental resistance and organic solvent resistance

(9) Strong resistance to repeated impact, good electrical performance, good recovery, good self-lubrication, good wear resistance, good dimensional stability.

Low warp POM glass beads 25% enhanced Application:

It can replace most non-ferrous metals, automobile, machine tools, instrument parts, bearings, fasteners, gears, springs, pipes, conveyor belt accessories, electric water tanks, pump shells, drainers, faucets, etc.

Contact Now For Low warp POM glass beads 25% enhanced.

Tina Lin < Email : ###>

is one of the professional low warp pom glass beads 25% enhanced manufacturers, you can order high quality low warp pom glass beads 25% enhanced at good price from our factory.