描述
尼龙66塑料颗粒
尼龙66塑料颗粒
聚酰胺塑料
注射/挤出级PA66树脂
颜色可选，
优点高抗冲击性，易于成型，
玻璃纤维增强碳纤维增强，
阻燃级，增韧级，
包装25kg/袋（也可定制）
尼龙66塑料颗粒
产品详细信息
| 材质 | 尼龙66塑料颗粒Modle | KY-TR2001 |
| 类型 | 颗粒、颗粒、塑料颗粒、夹子、颗粒 | |
| 填充 | <玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等 | |
| 颜色 | 根据需要 | 5%-60% |
| 抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等 |
尼龙66塑料颗粒具有较高的熔点
模具温度：建议为80℃。模具温度会影响结晶度，结晶度会影响产品的物理性能。对于薄壁塑料零件，如果使用低于40℃的模具温度，塑料零件的结晶度将随时间而变化。为了保持塑料零件的几何稳定性，需要进行退火处理
注射速度：高速（增强材料稍低）如果您对纽约感兴趣，请与我联系，我们将进一步讨论，并发送我们的专业计划供您参考
Nylon 66 Plastic Particles
Nylon 66 plastic particles
Polyamide plastic plastic
PA66 resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).
Nylon 66 Plastic Particles
Product Details
| Material | Nylon 66 plastic particles |
| Modle | KY-TR2001 |
| Type | granules，pellets，plastic granule,clips,particle. |
| Filler | fibre galss , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
Nylon 66 plastic particles
PA66 plastic has a higher melting point.
PA66 plastic still has hygroscopicity after molding. PA66 plastic has low viscosity. The thermal melting point of PA66 plastic is the temperature at which the crystal melts. For crystalline polymer PA66 plastic, it shows a clear melting point. According to the test method used, the melting point is Fluctuates in the range of 259~267℃.
Melting temperature: 260~290C. The glass additive product is 275~280C. The melting temperature should be avoided higher than 300C.
Mold temperature: 80C is recommended. The mold temperature will affect the crystallinity, and the crystallinity will affect the physical properties of the product. For thin-walled plastic parts, if a mold temperature lower than 40C is used, the crystallinity of the plastic parts will change over time. In order to maintain the geometric stability of the plastic parts, annealing treatment is required.
Injection pressure: usually 750~1250bar, depending on material and product design.
Injection speed: high speed (slightly lower for reinforced materials).
More detail of Nylon 66 plastic particles.Any interested in, pls kindly contact with me, we will talk further and send you our professional plan for your reference.
评价
目前还没有评价