描述

轴承用尼龙66+30%gf+Mos2。高抗拉强度
2，优良的韧性和抗冲击性
3，自润滑，良好的耐磨性，优异的耐化学性
4，良好的低温特性
5，具有自熄功能<尼龙66+30%gf+Mos2

尼龙66+30%gf+Mos2用于轴承

产品详细信息<用于轴承的尼龙66+30%gf+Mos2是五种工程塑料中最大、最多样化、用途最广泛的一种，是半透明或不透明的结晶聚合物。密度在1.12和1.14之间。与PA6相比，尼龙66更广泛地应用于汽车工业、仪表外壳和其他要求抗冲击性和高强度的产品中。专门用于制造机械、汽车、化工和电气部件，如齿轮、滚柱、滑轮、滚柱、泵体中的叶轮、风机叶片、高压密封件、阀座、垫片、衬套、各种手柄、支撑架、钢丝包装内层、，用于轴承的尼龙66+30%gf+Mos2产品名称<尼龙66塑料颗粒/PA66颗粒颜色根据需要优点具有竞争力的价格、高品质、准时交货、免费样品环境友好型高抗听力、高抗冲击性无任何杂质可使用玻璃纤维/韧性/阻燃剂/紫外线稳定剂进行加固包装25kg/袋（也可定制）

尼龙66注射成型工艺条件：尼龙66+30%gf+Mos2用于轴承

1。干燥处理：如果材料在加工前密封，则无需干燥。但是，如果打开储存容器，建议在85°C的热空气中干燥。如果湿度大于0.2%，还需要在105°C下进行12小时的真空干燥。尼龙66+30%gf+Mos2用于轴承。熔融温度：260~290°C。玻璃添加剂的产品温度为275~280°C。熔融温度应避免超过300°C。尼龙66+30%gf+Mos2用于轴承。模具温度：建议为80°C。模具温度会影响结晶度，结晶度会影响产品的物理性能。对于薄壁塑料零件，如果使用低于40°C的模具温度，塑料零件的结晶度将随时间变化，为了保持塑料零件的几何稳定性，需要进行退火处理。尼龙66+30%gf+Mos2用于轴承

耐磨等级尼龙中添加二硫化钼，大大提高了耐磨性和自润滑性，比普通尼龙高2-3倍

广泛用于各种齿轮、自润滑衬套、结构件。尼龙66+30%gf+Mos2用于轴承

有关尼龙66+30%gf+Mos2的任何问题，请直接与我们联系

立即联系：特蕾西###

Nylon66+30%gf+Mos2 For Bearings

PA66 plastic resin
1. High tensile strength;
2, excellent resistance to toughness and impact resistance;
3, self-lubricating, good wear resistance, excellent chemical resistance
4, good low temperature characteristics;
5, with self-extinguishing;
nylon66+30%gf+Mos2

Nylon66+30%gf+Mos2 For Bearings

Product Details

Nylon66+30%gf+Mos2 for bearings

Nylon66(Polyamide66),is the largest, most diverse and most versatile variety of the five engineering plastics, andtranslucent or opaque crystalline polymer. Thedensityis between 1.12 and 1.14. Compared with PA6, nylon 66 is more widely used in the automotive industry, instrument housings and other products that requirehighimpact resistance and high strength requirements. Specifically used in the manufacture of mechanical, automotive, chemical and electrical components, such as gears, rollers, pulleys, rollers, impellers in the pump body, fan blades, high pressure seals, valve seats, gaskets, bushings, various handles , support frame, inner layer of wire package, etc.nylon66+30%gf+Mos2 for bearings

Product name	Nylon66 plastic pellets/PA66 granules
Color	As required
Advantage	Competitive price,high quality,on-time delivery,free sample
	Enviroment friendly
	High Hear Resistance,High impact resistance
	Without any impurity
	Can be reinforced with the glassfiber/toughness/flameretardant/UV stabilizer
Packing	25kg/bag(also customizable)

Nylon66 injection molding process conditions:nylon66+30%gf+Mos2 for bearings

1. Drying treatment: If the material is sealed before processing, then there is no need to dry. However, if the storage container is opened, it is recommended to dry it in hot air at 85 °C. If the humidity is greater than 0.2%, it is also necessary to carry out vacuum drying at 105 ° C for 12 hours.nylon66+30%gf+Mos2 for bearings

2. Melting temperature: 260~290 °C. The product for glass additives is 275~280 °C. The melting temperature should be avoided above 300 °C.nylon66+30%gf+Mos2 for bearings

3. Mold temperature: 80 °C is recommended. The mold temperature will affect the crystallinity, which will affect the physical properties of the product. For thin-walled plastic parts, if a mold temperature lower than 40 ° C is used, the crystallinity of the plastic part will change with time, and in order to maintain the geometric stability of the plastic part, annealing treatment is required.nylon66+30%gf+Mos2 for bearings

The wear-resistant grade Nylon66 is added with molybdenum disulfide, which greatly improves the wear resistance and self-lubricity, and is 2-3 times higher than the general nylon.

Widely used in a variety of gears, self-lubricating bushings, structural parts.nylon66+30%gf+Mos2 for bearings

Any questions about nylon66+30%gf+Mos2 ,please contact us directly.

Contact Now：Tracy <###>