描述

尼龙PA9T GF35颗粒

产品名称：尼龙PA9T GF35颗粒

类型：原始/回收

工艺：注塑

颜色：定制颜色

尼龙PA9T GF35颗粒

产品细节

尼龙PA9T GF35颗粒

注射成型工艺

包装材料采用铝防潮袋，打开后可立即成型。然而，由于开封后的吸湿性，自然放置的颗粒的含水量会上升，需要重新干燥。对于再干燥条件，如果使用热风干燥器，请以120℃持续5小时作为参考标准。此外，干燥温度上限建议为140℃，干燥时间建议在4小时内

成型条件：

熔点：306℃

推荐的料筒温度：310～330℃

玻璃化转变温度：125℃

推荐的模具温度为130～150℃

<1。干燥：130℃/3-4小时。注射温度：290～310℃

3。模具温度：130~150℃

C立即接触尼龙PA9T GF35颗粒

Nylon PA9T GF35 Granules

Product Name : Nylon PA9T GF35 Granules
Type : Virgin / Recycled
Process : Injection Molding
Color : Customized Color

Nylon PA9T GF35 Granules

Product Details

Nylon PA9T GF35 Granules

Injection molding process

The packaging material uses aluminum moisture proof bag, which can be molded immediately after opening. However, the moisture content of naturally placed particles will rise due to moisture absorption after unsealing, which needs to be re dried. For the re drying conditions, if using hot air dryer, please take 120 ℃ for 5 hours as the reference standard. In addition, the upper limit of drying temperature is recommended to be 140 ℃ and the drying time is recommended to be within 4 hours.

Molding conditions:

Melting point: 306 ℃

Recommended barrel temperature: 310 ～ 330 ℃

Glass transition temperature: 125 ℃

The recommended mold temperature is 130-150 ℃

1. Drying: 130 ℃ / 3-4 hours

2. Injection temperature: 290 ～ 310 ℃

3. Mold temperature: 130 ~ 150 ℃

Contact Now for Nylon PA9T GF35 Granules.

Tina Lin < Email : ### >

is one of the professional nylon pa9t gf35 granules manufacturers, you can order high quality nylon pa9t gf35 granules at good price from our factory.