描述

改性二次成型材料TPE TPR TPV颗粒热塑性聚酯弹性体塑料材料

TPE材料优势

1。出厂价格，质量稳定

2。成本低，模具性能好

三,。优异的耐水性和耐热性

四,。平衡的机械性能

五,。优异的电气性能

六,。可提供免费样品

七,。易于成型

改性二次成型材料TPE TPR TPV颗粒热塑性聚酯弹性体塑料材料

产品详细信息

改性二次成型材料TPE TPR TPV颗粒热塑性聚酯弹性体塑料材料

热塑性弹性体TPE加工成型热塑性弹性体TPE是一种具有高弹性、高强度、高回弹的橡胶材料，具有注塑加工的特点。加工性能优越，可二次注塑，与PP、PE、PC、PS、ABS等变电站材料包层粘接，也可单独成型

1。TPE
不经烘焙的TPE体积小，吸水率低，一般在0.5%左右。对于通常模制的TPE（例如挤出成型、单材料注射成型、流涎成型），模制前不需要干燥和烘烤

2。TPE
1）需要涂层材料的TPE。涂层类型的TPE、成型前推荐的烘焙材料、TPE
产品（如涂层胶ABS、PC、PA等），有些产品对产品表面的外观光泽有更高的要求，以避免TPE颗粒中可能残留的水分，在成型过程中挥发，导致
产品的空气模式，影响外观，建议在成型前进行烘焙处理

2）打开后未及时使用且未及时包装的TPE材料，建议烘烤材料三次，烘烤温度是多少？拆封后粘合剂未及时封装，如果仓库环境相对潮湿，可能导致TPE颗粒超过水标准，则成型前需要进行烘烤处理。TPE粘合剂的硬度越高，所需的烘焙温度越高。TPE粘合剂的较低硬度（ShoreA0至60），建议的烘烤温度为40至60摄氏度，TPE粘合剂的较高硬度（ShoreA60至100），建议的烘烤温度为60至80摄氏度。

是一家专业的改性二次成型材料TPE tpv颗粒热塑性聚酯弹性体塑料制造商，您可以从我们工厂以优惠的价格订购高质量的改性二次成型材料tpe tpr tpv颗粒热塑性聚酯弹性体塑料材料

Modified Overmolding Material TPE TPR TPV Pellet Thermoplastic Polyester Elastomer Plastic Material

.
TPE Material Advantages
1. Factory price with stable quality
2. Low-cost and high Mold-ability.
3. Excellent Water Resistance and Heat Resistance.
4. Balanced Mechanical properties.
5. Excellent Electrical properties.
6. Free sample can be provided.
7. Easy Molding

Modified Overmolding Material TPE TPR TPV Pellet Thermoplastic Polyester Elastomer Plastic Material

Product Details

Modified Overmolding material TPE TPR TPV Pellet Thermoplastic Polyester Elastomer Plastic Material

Thermoplastic elastomer TPE processing molding thermoplastic elastomer TPE is a kind of
material with high elasticity, high strength, high return elasticity of rubber, and the characteristics of injection molding
processing. The processing performance is superior, can be secondary injection molding, with PP, PE, PC, PS, ABS and other substation material clad bonding, can also be molded individually.

1. TPE
TPE without baking is small, low water absorption rate, generally around 0.5%. For TPE, which is generally molded (e.g. extruded, single-material injection molded, salivating), drying and baking is not required before molding.

2. TPE
1)TPE of the coating material is required. TPE of the coating type, the recommended baking material before molding, the TPE
products (such as the coating glue ABS, PC, PA, etc.), some have higher requirements for the appearance gloss of the surface of the product, in order to avoid the possible residual moisture in the TPE particles, volatile in molding, resulting in the
product air pattern, affecting the appearance, it is recommended to do the baking treatment before molding.

2) After opening not timely use and not timely packaging of TPE material, it is recommended that baking material three, baking
temperature is what? The adhesive is not encapsulated in time after opening, if the warehouse environment is relatively humid, may lead to TPE particles exceeding the water standard, then it is necessary to do baking treatment before molding. The higher the hardness of the TPE adhesive, the higher the required baking temperature. Lower hardness (ShoreA0 to 60) of TPE adhesive, recommended baking temperature of 40 to 60 degrees C, higher hardness (ShoreA60 to 100) of TPE adhesive, recommended baking temperature of 60 to 80 degrees C.

is one of the professional modified overmolding material tpe tpr tpv pellet thermoplastic polyester elastomer plastic material manufacturers, you can order high quality modified overmolding material tpe tpr tpv pellet thermoplastic polyester elastomer plastic material at good price from our factory.