描述

玻璃纤维填充PA6。6 30%玻璃纤维填充PA6。6 30%gf

聚酰胺66塑料

尼龙66树脂，用于注射/挤出级，

颜色可供选择，

优点高抗冲击性，易于成型，

玻璃纤维增强碳纤维增强，

阻燃级，增韧级，

包装25kg/袋（也可定制）

玻璃纤维填充尼龙6。6 30%Gf

产品详细信息

<

玻璃纤维增强尼龙6.6的成型过程与未增强的成型过程大致相同，但由于流动性比增强前差，应适当提高注射压力和注射速度，筒体温度应增加10-40°C。由于玻璃纤维在注射成型过程中沿流动方向定向，因此机械性能和收缩率将在定向方向上增加，导致产品变形和翘曲。因此，在设计模具时，浇口的位置和形状应合理，并可改进工艺。调整模具温度，取出后放入热水中，慢慢冷却

此外，添加的玻璃纤维比例越大，注塑机塑化部件的磨损越大。最好使用双金属螺钉和桶

玻璃纤维填充尼龙6.6 30%玻璃纤维的更多细节<。如有兴趣，请与我联系

现在联系：特蕾西

Glass Fiber Filled PA6.6 30% Gf

Glass fiber filled PA6.6 30% gf
polyamide 66 plastic plastic
Nylon 66 resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).

Glass Fiber Filled PA6.6 30% Gf

Product Details

材质

玻璃纤维填充尼龙6.6 30%玻璃纤维Modle

KY-TR2001

Material	Glass fiber filled PA 6.6 30% gf
Modle	KY-TR2001

Glass fiber filled PA 6.6 30% gf

By adding 30% glass fiber to PA 6.6, the mechanical properties, dimensional stability, heat resistance, and aging resistance of PA 6.6 are significantly improved, and the fatigue strength is 2.5 times that of unreinforced.

The molding process of glass fiber reinforced PA 6.6 is roughly the same as that without reinforcement, but because the flow is worse than before reinforcement, the injection pressure and injection speed should be appropriately increased, and the barrel temperature should be increased by 10-40°C. Since the glass fiber is oriented along the flow direction during the injection molding process, the mechanical properties and shrinkage rate will increase in the orientation direction, resulting in deformation and warpage of the product. Therefore, when designing the mold, the position and shape of the gate should be reasonable, and the process can be improved. The temperature of the mold, put the product in hot water after taking it out, and let it cool down slowly.

In addition, the greater the proportion of glass fiber added, the greater the wear on the plasticizing components of the injection molding machine. It is better to use bimetallic screws and barrels.

More detail of Glass fiber filled PA 6.6 30% gf.Any interested in, pls kindly contact with me.

Contact now:Tracy<###>