描述

玻璃纤维增强尼龙6塑料

高温、高强度、阻燃、增韧、抗寒-40摄氏度

玻璃纤维增强尼龙6塑料

产品详细信息‍玻璃纤维增强尼龙6塑料

尼龙是聚酰胺纤维的一个术语，可制成长纤维或短纤维

与普通PA6相比，高流动性PA6具有较低的熔体粘度和较高的MFR，有利于无卤阻燃剂和GF在基体材料中的混合和分散。因此，在相同的配方和工艺条件下，它表现出更好的性能。阻燃效果好，机械性能好

市场对PA6的需求正在增加。无机晶须增强、碳纤维增强等新型增强尼龙材料已成为一个重要品种，主要用于汽车发动机零件、机械零件和航空设备的各种零件。PA6合金化将成为改性工程塑料发展的主流。尼龙合金化是实现尼龙高性能的重要途径。铸造尼龙是以己内酰胺为单体，强碱性物质为催化剂，与助催化剂和其他添加剂一起制成的。真空脱水后，直接注入预热到一定温度的模具中，聚合成固体坯料

通过熔融纺丝法在显微镜下观察到的尼龙的形态结构具有圆形横截面，没有特殊的纵向结构

因为PA6原料容易吸湿，但吸湿后会影响加工过程。如果熔体粘度降低，产品表面会出现气泡或银条，产品的机械性能也会显著降低，因此，在形成PA6之前，必须先干燥原材料，尼龙塑料材料在高温下容易氧化，导致变色和降解。因此，在干燥时，最好使用真空。干涸的道路

是专业的玻璃纤维增强尼龙6塑料制造商之一，您可以从我们工厂以优惠的价格订购高品质的玻璃纤维增强尼龙6塑料

Glass Fiber Reinforced Nylon6 Plastic

High temperature,
high strength,
fire retardant，
Toughening,
anti-cold -40 degrees centigrade.

Glass Fiber Reinforced Nylon6 Plastic

Product Details

‍Glass Fiber Reinforced Nylon6 Plastic

Nylon is a term for polyamide fibers, which can be made into long or short fibers.

Compared with ordinary PA6, high-flow PA6 has low melt viscosity and high MFR, which is conducive to the mixing and dispersion of halogen-free flame retardants and GF in the matrix material. Therefore, under the same formula and process conditions, it shows better performance. Flame retardant effect and better mechanical properties.

The demand for PA6 in the market is increasing. New reinforced nylon materials such as inorganic whisker reinforcement and carbon fiber reinforcement have become an important variety, mainly used for automotive engine parts, mechanical parts and various parts of aviation equipment. PA6 Alloying will become the mainstream of the development of modified engineering plastics. Nylon alloying is an important way to achieve high performance of nylon. Cast nylon is based on caprolactam as a monomer, a strong alkaline substance as a catalyst, and together with co-catalysts and other additives. After vacuum dehydration, it is directly injected into a mold that has been preheated to a certain temperature, and polymerized into a solid billet.

The morphological structure of the nylon obtained by the melt-spinning method observed in the microscope has a circular cross-section and no special longitudinal structure.

Because PA6 raw materials are easy to absorb moisture, but after moisture absorption, it will affect the processing process. If the viscosity of the melt decreases, bubbles or silver streaks will appear on the surface of the product, and the mechanical properties of the product will also appear significantly reduced. , Therefore, before the PA6 is formed, the raw materials must be dried first, and the nylon plastic material is easily oxidized at high temperature, resulting in discoloration and degradation. Therefore, when drying, it is better to use vacuum. dry way.

Contactnowformoredetailsabout Glass Fiber Reinforced Nylon6 Plastic.

is one of the professional glass fiber reinforced nylon6 plastic manufacturers, you can order high quality glass fiber reinforced nylon6 plastic at good price from our factory.