描述

电缆扎带用PA66塑料树脂的温度

一,。增强PA66材料

2。用于注射成型

3。机械强度高

4。免费样品

电缆扎带用耐高温PA66塑料树脂

产品详细信息

电缆扎带用耐低温PA66塑料树脂

塑料注射成型工艺简介：

熔融温度：260至290C

模具温度：建议为80摄氏度

注射压力：通常在750到1250巴之间，取决于材料和产品设计

注射速度：高速（增强材料略低）。流道和浇口：浇口的位置很重要，因为耐寒PA66的固化时间很短

耐寒PA66塑料应用PA66是PA系列中使用最广泛的高机械强度品种，因为其结晶度高、硬度高、耐热性高、高温电气插座零件、电气零件、齿轮、轴承、滚柱、弹簧支架、皮带轮、螺栓、叶轮、风机叶片、螺旋桨、高压密封垫片、阀座、，输油管道、储油容器、绳索、皮带、传动带、砂轮粘合剂、电池盒、绝缘电气部件、芯线、拔丝等。

是电缆扎带制造商的专业耐高温pa66塑料树脂之一，您可以从我厂以优惠价格订购用于电缆扎带的优质耐高温pa66塑料树脂

Temperature PA66 Plastic Resin For Cable Tie

.
1. Reinforced PA66 Material
2. Used for Injection Molding
3. High mechanical strength
4. FREE SAMPLE

Temperature PA66 Plastic Resin For Cable Tie

Product Details

Temperature PA66 Plastic resin for cable tie

Low temperature-resistant PA66 plastic injection molding process introduction:

melting temperature: 260 to 290C.

Mold temperature: Recommended 80C.

Injection pressure: usually between 750 and 1250 bar, depending on the material and product design.

Injection speed: high speed (slightly lower for reinforced materials). Runners and gate: The position of the gate is important due to the short solidification time of the cold-resistant PA66.

The cold-resistant PA66 plastic application PA66 is the most widely used variety of high mechanical strength in the PA series, because of its high crystallization, its rigidity, heat resistance is high, high temperature electrical socket parts, electrical parts, gears, bearings, rollers, spring support, pulleys , bolts, impellers, fan blades, propellers, high-pressure seal gaskets, seats, oil pipelines, oil storage containers, ropes, straps, drive belts, grinding wheel adhesives, battery compartments, insulated electrical parts, cores, wire extraction, etc.

is one of the professional temperature pa66 plastic resin for cable tie manufacturers, you can order high quality temperature pa66 plastic resin for cable tie at good price from our factory.