描述
PEEK树脂聚合物产品：PEEK树脂聚合物颜色：天然、黑色、蓝色等
聚醚醚酮树脂聚合物
PEEK树脂聚合物PEEK的主要性能：PEEK是一种芳香族结晶性热塑性聚合物材料，其熔点为343℃，具有与聚酰亚胺（PI）相当的特性，因此被称为超耐热热塑性树脂。其主要性能如下：
高温性能：PEEK聚合物和化合物的玻璃化转变温度和熔点通常分别为143°C和340°C。试验结果表明，虽然未增强纯树脂的热变性温度仅为160℃（HDT/b），但经玻璃纤维和碳纤维增强后，热变形温度可达315℃，连续使用温度可达260℃
耐磨性:PEEK树脂聚合物可在各种压力、温度、速度和相对粗糙的接触表面条件下提供优异的耐磨性，可达到聚酰亚胺材料的等级
可燃性、烟雾和有毒气体排放水平：PEEK树脂聚合物非常稳定，在厚度为1.45MM时不添加任何阻燃剂，即可满足FR V-0阻燃要求。材料的成分和固有纯度使其在火灾环境中产生的烟雾和气体非常少
自润滑性：PEEK树脂在所有塑料中都具有优异的滑动性能，适用于要求严格的低摩擦系数和耐磨性应用。特别是，每种比例为10%或30%的碳纤维、石墨和聚四氟乙烯（PTFE）的滑动级具有优异的滑动特性
有关PEEK树脂聚合物的详细信息，请立即联系
PEEK Resin Polymer
Product : PEEK resin Polymer
Color : Natural,Black,Blue etc
Type : Virgin,off grade,recycled Poly-ether-ether-ketone PEEK Polymer
PEEK Resin Polymer
Product Details
PEEK resin Polymer
Main performance of PEEK:
Peek is a kind of aromatic crystalline thermoplastic polymer material, its melting point is 343 ℃, and it has the characteristics comparable to polyimide (PI), so it is called super heat resistant thermoplastic resin. Its main properties are as follows:
High temperature properties: the glass transition temperature and melting point of PEEK polymers and compounds are usually 143 ° C and 340 ° C, respectively. The test results show that although the thermal denaturation temperature of unreinforced pure resin is only 160 ℃ (HDT / b), the thermal deformation temperature can reach 315 ℃ after reinforced with glass fiber and carbon fiber, and the continuous service temperature can reach 260 ℃.
Wear resistance: PEEK resin Polymer can provide excellent wear resistance under various pressure, temperature, speed and relatively rough contact surface conditions, which can reach the grade of polyimide materials.
Chemical corrosion resistance: PEEK polymers are resistant to most chemical environments even at high temperatures. In normal environment, only strong protonic acids, such as concentrated sulfuric acid, hydrofluoric acid and chlorosulfonic acid, can dissolve or destroy it.
Flammability, smoke and toxic gas emission level: PEEK resin Polymer is very stable and can meet FR V-0 flame retardant requirements without adding any flame retardant at the thickness of 1.45MM. The composition and inherent purity of the material make it produce very little smoke and gas in fire environment.
Hydrolysis resistance: PEEK resin Polymer and compounds can resist chemical damage caused by water or high pressure steam. The components made of these materials can work continuously in water environment under high temperature and high pressure, but still maintain good mechanical properties. Peek has low water absorption and can be used in pressurized hot water or steam at 300 ℃.
Fatigue resistance: poly (ether ether ketone) resin is a kind of plastic with both toughness and rigidity. In particular, its excellent fatigue resistance to alternating stress is the most outstanding of all plastics, comparable to alloy materials.
Self lubricity: PEEK resin has outstanding sliding properties in all plastics and is suitable for use in strictly demanding low friction coefficient and wear resistance applications. In particular, the sliding grade of carbon fiber, graphite and polytetrafluoroethylene (PTFE) with 10% of each proportion or 30% CF reinforced grade are of excellent sliding characteristics.
Electrical properties and radiation resistance: PEEK resin Polymer has excellent electrical properties, which can be stable in a wide range of temperature and frequency, and its dielectric loss is very small even at high frequency, such as 0.0033 at 1010 Hz. At room temperature, the volume resistance is 1016 Ω· cm and the breakdown voltage is 17kv / mm. The ability of resistance to gamma irradiation is very strong, which is better than polystyrene which has the best radiation resistance among general resins. It can be used as high-performance wire with good insulation when the radiation dose reaches 1100mrad.
Peel resistance: peel resistance of PEEK resin is very good, so it can be made into thin coated wire or electromagnetic wire, and can be used in harsh conditions.
Contact now for more details about PEEK resin Polymer.
Tina Lin<###>
is one of the professional peek resin polymer manufacturers, you can order high quality peek resin polymer at good price from our factory.
评价
目前还没有评价