描述
防静电ABS塑料材料
防静电ABS塑料材料
丙烯腈-丁二烯-苯乙烯塑料，
注塑/挤出级ABS树脂，
颜色任何颜色均可，
优点高抗冲击性，易于成型，
玻璃纤维增强碳纤维增强，
阻燃级，增韧级，
包装25公斤/袋（也可定制）
防静电ABS塑料材料
产品详细信息材质 防静电ABS塑料材料
Modle KY-TR5001 类型 颗粒、颗粒、塑料树脂、夹子、颗粒 填充 玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等 颜色 根据需要 填充内容 5%-60% 抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等 导电ABS+炭黑
防静电ABS塑料材料
材料：ABS永久防静电等级
表面电阻率：108-1010Ω
颜色：自然色，配色
成型工艺：注塑，挤出水平
<，塑料ABS具有良好的电气绝缘性，几乎不受温度、湿度和频率的影响，可以在大多数环境中使用
加工模具温度：模具温度对ABS产品的表面粗糙度有重要影响，并降低产品的内应力。模具温度高，熔体易于填充模具，产品外观好，内应力小，产品的可电镀性也得到改善或提高，但产品收缩率大，成型周期长，易脱模。变化和其他问题。对于一般要求的产品，模具温度可控制在40~50X：对于外观和性能要求较高的产品，模具温度可控制在60~70C。此外，模具温度必须均匀，模具型腔和模芯之间的温差不得超过10℃。对于深孔产品或形状更复杂的产品，要求模腔温度略高于模芯温度，以便于产品顺利释放。霉菌
更多关于防静电ABS塑料材料的详细信息，如有兴趣，请与我联系，我们将进一步讨论并发送我们的专业计划供您参考
立即联系：特蕾西
Anti-static ABS Plastic Material
Anti-static ABS plastic material
Acrylonitrile Butadiene Styrene plastic,
ABS resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).
Anti-static ABS Plastic Material
Product Details
| Material | Anti-static ABS plastic material |
| Modle | KY-TR5001 |
| Type | granules，pellets，plastic resin,clips,particle. |
| Filler | glass fiber , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
Conductive ABS+carbon black
Material: ABS permanent anti-static grade
Surface resistivity: 108 -1010Ω
Color: natural color, color matching
Molding process: injection molding, extrusion level
Uses: Pallets, turnover boxes, plates, sheets, electrical enclosures, electronic parts and other products
Plastic ABS has good electrical insulation and is hardly affected by temperature, humidity and frequency, and can be used in most environments.
Process mold temperature: The mold temperature has an important effect on the surface roughness of ABS products and reduces the internal stress of the products. The mold temperature is high, the melt is easy to fill the mold, the appearance of the product is good, the internal stress is small, and the electroplatability of the product is also improved or improved, but there are also large product shrinkage rates, long molding cycles, and easy demolding. Variations and other issues. For products with general requirements, the mold temperature can be controlled at 40~50X: For products with higher appearance and performance requirements, the mold temperature can be controlled at 60~70C. Moreover, the mold temperature must be uniform, and the temperature difference between the mold cavity and the mold core should not exceed 10. For deep-hole products or products with more complex shapes, the mold cavity temperature is required to be slightly higher than the mold core temperature to facilitate the smooth release of the product. mold.
More detail of Anti-static ABS plastic material,Any interested in, pls kindly contact with me, we will talk further and send you our professional plan for your reference.
评价
目前还没有评价