描述

高流动性PA6+30%GF塑料树脂

PA6塑料材料

热塑性、轻质、坚韧、化学和耐用

良好的耐磨性、自润滑性和耐溶剂性

免费样品和快递

高流动性PA6+30%GF塑料树脂

玻璃纤维增强尼龙加工性能

玻璃纤维增强尼龙加工应完全干燥，可在80-90摄氏度的热空气中循环干燥，直到含水量不超过0.3%，并应防止干燥和吸湿

（2）高温易氧化降解，在满足成型工艺的前提下，应避免溶质温度，避免在桶内停留时间过长

（3）流动性非常好，物料容易溢出，需要使用自锁喷嘴

（4）熔体的冷却速度有较大的结晶阴影，对塑料零件的结构和性能有显著影响，应控制模具温度

（5）对于透明度高、柔软性好的薄壁塑料零件，建议采用较低的模具温度；对于硬度高、耐磨性好、形状小的厚壁塑料零件，应使用较高的模具温度

（6）产品壁厚应尽可能均匀，释放斜率应更大，尤其是厚壁和深高型产品应取较大值

（7）当使用螺杆注塑机时，建议使用高压缩比螺杆，螺杆头应安装一个支承环，以避免熔体回流

（8）筒体温度取决于原材料种类、塑料零件形状和注射成型类型，主要取决于其熔点

是专业的高流动性pa6+30%gf塑料树脂制造商之一，您可以从我们工厂以优惠的价格订购高品质高流动性pa6+30%gf塑料树脂

High Flow PA6+30%GF Plastic Resin

.
PA6 Plastic Material
Thermoplastic, lightweight, tough, chemical and durable
Good wear resistance, self-lubricating and solvent resistance
Free Sample and express delivery

High Flow PA6+30%GF Plastic Resin

Product Details

High Flow PA6+30%GF Plastic Resin

Glass fiber enhances nylon processing performance: .

(1)Glass fiber-reinforced nylon processing should be fully dry, can be cycled dry in the hot air 80-90 degrees C until the water content does not exceed 0.3%, and should prevent drying and then moisture absorption.

(2)High temperature is easy to oxidize and degrade, under the premise of meeting the molding process, the solute temperature should be avoided, and the retention time in the barrel should be avoided for too long.

(3)Very good liquidity, easy to spill material, the need to use a self-locking nozzle.

(4)The cooling speed of the melt has a larger crystalline shadow and has a significant effect on the structure and performance of the plastic parts, and the mold temperature should be controlled.

(5)for thin-walled plastic parts with high transparency and better softness, it is advisable to adopt a lower mold temperature; For thick-walled plastic parts with high hardness, good wear resistance and small shape, high mold temperature should be used.

(6)product wall thickness should be as uniform as possible, release slope should be larger, especially for thick wall and deep high-type products should be taken large value.

(7)When using screw injection molding machine, it is advisable to use a high compression ratio screw, the screw head should be fitted with a back ring, so as to avoid the return of the melt.

(8) The barrel temperature depends on the raw material variety, shape of the plastic parts and injection molding type, mainly according to its melting point.

is one of the professional high flow pa6+30%gf plastic resin manufacturers, you can order high quality high flow pa6+30%gf plastic resin at good price from our factory.