描述
黑色PA6+GF25%颗粒材料
（1）在中国的直接出厂价
（2）OEM和定制是可行的
（3）免费样品
（4）24小时在线
（5）完整的质量保证
（6）出厂检验报告
下载
黑色PA6+GF25%颗粒材料
产品详细信息
特点：热塑性、轻质、坚韧、化学性和耐久性
优点：尼龙具有优良的韧性、自润滑性、耐磨性、耐化学性、透气性、耐油性、无毒性和易着色性
缺点：尼龙吸湿性高、长期尺寸精度和物理性能受到影响。
使用PA6:
电子和电子产品：连接器、线轴、定时器、盖断路器、开关外壳。
汽车行业：冷却风扇、门把手、，油箱盖、进气格栅、水箱盖、灯座等工业零件：座椅、自行车车架、滑板座、纺织梭、踏板等。PA6的化学和物理性能与PA66相似，但其熔点低，加工温度范围宽
它比PA66具有更好的抗冲击性和溶解性，但也更吸湿
因为塑料零件的许多质量特性都受到吸湿性的影响，所以在设计使用PA6的产品时应考虑到这一点
玻璃是最常见的添加剂，有时会添加EPDM和SBR等合成橡胶以提高抗冲击性。对于不含添加剂的产品，PA6收缩率在1%到1.5%之间。添加玻璃纤维添加剂可将收缩率降低至0.3%
（但在垂直于流动的方向上略高）。模塑组件的收缩主要受材料的结晶度和吸湿性影响
黑色PA6+gf25% | 48%宽度（48%””Black PA6+GF25% Granules Material(1)Direct factory price in china Download Black PA6+GF25% Granules Material Product DetailsFeatures: thermoplastic, lightweight, tough, chemical and durable Advantages: Nylon has excellent toughness, self-lubricity, wear resistance, chemical resistance, gas permeability, oil resistance, non-toxicity and easy coloring. Disadvantages: high nylon moisture absorption, long-term dimensional precision and physical properties are affected Use of PA6: Electronics and electronics: connectors, bobbins, timers, cover circuit breakers, switch housings Automotive sector: cooling fan, door handle, fuel tank cap, air intake grille, water tank cover, lamp holder Industrial parts: seat, bicycle frame, skate base, textile shuttle, pedal, The chemical and physical properties of PA6 are similar to those of PA66, however, it has a low melting point and a wide process temperature range. It has better impact and solubility resistance than PA66, but it is also more hygroscopic. Because many of the quality characteristics of plastic parts are affected by hygroscopicity, this should be taken into account when designing products using PA6. In order to improve the mechanical properties of PA6, various modifiers are often added. Glass is the most common additive, and sometimes synthetic rubbers such as EPDM and SBR are added to improve impact resistance. For products without additives, PA6 shrinks between 1% and 1.5%. The addition of a glass fiber additive reduces the shrinkage to 0.3% (but slightly higher in the direction perpendicular to the flow). The shrinkage of the molding assembly is mainly affected by the crystallinity and hygroscopicity of the material.
您必须登录才能发表评价。 相关产品 |
评价
目前还没有评价