描述

1200 1300 1400 MFI PP颗粒

产品：1200 1300 1400 MFI PP颗粒
1。超高流量
2。窄分子量分布
3。低气味

1200 1300 1400 MFI聚丙烯颗粒

产品详细信息

1200 1300 1400 MFI PP颗粒

[1500 PPH/1800 PPH高流动性PP塑料主要特点]：

无毒、无味、低密度、强度、刚度、硬度和耐热性优于低压聚乙烯，可在100℃左右使用。具有良好的介电性能，高频绝缘不受湿度影响，但在低温下会变脆，不耐磨，容易老化。适用于制造一般机械零件、耐腐蚀零件和绝缘零件。常见的有机溶剂如酸和碱对其影响不大，可用于餐具

1200 1300 1400 MFI PP颗粒聚丙烯有许多优良的特性：

1。相对密度很小，只有0.89-0.91，是塑料中最轻的品种之一

2。机械性能好，除耐冲击外，其他机械性能均优于聚乙烯，成型性能好

3。耐热性高，连续使用温度可达110-120℃

4。它具有良好的化学性质，几乎不吸水，并且不与大多数化学品发生反应

5。质地纯净无毒

6。良好的电气绝缘性

7。聚丙烯制品的透明度优于高密度聚乙烯制品

口罩特殊材料pp/医用级pp/pp熔喷材料1200 1300 1400 MFI pp颗粒

事实上，无论是无纺布还是熔喷织物，主要原材料都是塑料材料，如pp、pet、pa等，熔喷织物的主要材料是pp材料

当然，它不是普通的pp材料。这种pp原料必须具有高熔融指数的特性。一般熔融指数要求在1200-1800之间，其次是分子量分布窄、流动性稳定、灰分低等优异性能

高熔点pp通常由pp树脂通过改性工艺制成，目前常用的方法是通过受控流变改性方法获得，其中过氧化物发生降解反应

有关1200、1300、1400 MFI PP颗粒的更多详细信息，请立即联系

林婷娜

1200 1300 1400 MFI PP Granules

Product : 1200 1300 1400 MFI PP Granules
1. Super High Flow
2. Narrow molecular weight distribution
3. Low odor

1200 1300 1400 MFI PP Granules

Product Details

1200 1300 1400 MFI PP Granules

[1500 PPH /1800 PPH High Flow PP Plastic Main features]:

Non-toxic, odorless, low density, strength, stiffness, hardness and heat resistance are better than low-pressure polyethylene, can be used at about 100 ℃. Has a good dielectric

Performance and high-frequency insulation are not affected by humidity, but become brittle at low temperatures, not wear-resistant, and easy to age. Suitable for making general mechanical parts, corrosion-resistant parts and

Insulated parts. Common organic solvents such as acids and alkalis have little effect on it, and can be used in tableware.

1200 1300 1400 MFI PP Granules Polypropylene has many excellent characteristics:

1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.

2. Good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding performance.

3. It has high heat resistance, and the continuous use temperature can reach 110-120 ℃.

4. It has good chemical properties, hardly absorbs water, and does not react with most chemicals.

5. The texture is pure and non-toxic.

6. Good electrical insulation.

7. The transparency of polypropylene products is better than that of high-density polyethylene products.

Mask special material pp / medical grade pp / pp meltblown material1200 1300 1400 MFI PP Granules

In fact, whether it is a non-woven fabric or a melt-blown fabric, the main raw materials are plastic materials, such as pp, pet, pa, etc., and the main material of the melt-blown fabric is pp material.

Of course, it is not an ordinary pp material. This pp raw material must have the characteristics of a high melt index. The general melt index is required to be in the range of 1200-1800, followed by excellent performance such as narrow molecular weight distribution, stable fluidity, and low ash.

High melting point pp is generally made from pp resin through a modification process, and the currently commonly used method is obtained through a controlled rheology modification method in which a degradation reaction of peroxide occurs.

Contact now for more details about 1200 1300 1400 MFI PP Granules.

Tina Lin<###>