描述
尼龙12塑料原材料是一种热塑性塑料材料，可从半结晶变为结晶
其自身性能几乎与PA11塑料相似
唯一的区别是尼龙12材料的密度相对较高。较小，
因此在所有尼龙系列塑料材料中，PA12塑料材料的密度最小，
吸水率也较小，这直接有助于其良好的尺寸稳定性，
其耐低温性。也很好
PA12-GF30%用于塑料快速连接器
产品详细信息
7。噪声和振动阻尼特性。负载频繁变化导致的良好抗疲劳性。易于加工
除了尼龙的一般性能外，与其他尼龙相比，PA11和PA12具有较低的密度、较低的吸水性、良好的耐低温性、良好的耐磨性和一定的自润滑性。结晶度高，熔点低，易于成型加工，产品柔韧性好，与金属的附着力强，尺寸稳定性和热稳定性好，透气性低。其抗应力开裂性能优于PA6和PA66，耐碱性、耐油性和润滑脂性均优异
立即联系
电子邮件：###
PA12-GF30% For Plastic Quick Coupler
Nylon 12 plastic raw material is a thermoplastic plastic material that changes from semi-crystalline to crystalline.
Its own properties are almost similar to PA11 plastic materials.
The only difference is that the density of nylon 12 material is relatively more. Smaller,
so among all the nylon series plastic materials, the density of PA12 plastic material is the smallest,
and its water absorption rate is also small, which directly contributes to its good dimensional stability,
its low temperature resistance. Also very good
PA12-GF30% For Plastic Quick Coupler
Product Details
Characteristics
1. PA12-GF30%Minimum water absorption: there is almost no dimensional change in the molded part, as the humidity changes
2. PA12-GF30% withVery high impact resistance and Charpy notched impact strength, even much lower than freezing point
3. PA12-GF30% withGood resistance to grease, oil, fuel, hydraulic oil and many solvents as well as salt solutions and other chemicals
4. PA12-GF30% wiht excellent resistance to stress cracking, even for injection molded metal parts or embedded in plastics
5. PA12-GF30% with excellent wear resistance
6. Low dry friction coefficient compared to steel, polybutylene terephthalate, polyacetal, etc.
7. Noise and vibration damping characteristics
8. Good fatigue resistance caused by load changes frequently
9. Easy to process
PA12-GF30% For Plastic Quick Coupler
In addition to the general properties of nylon, PA11 and PA12 have lower density, lower water absorption, good low temperature resistance, good wear resistance and certain self-lubricity compared with other nylons. It has high crystallinity, low melting point, easy molding and processing, good flexibility of the product, strong adhesion to metal, good dimensional stability and thermal stability, and low air permeability. The stress crack resistance is better than that of PA6 and PA66, and it is excellent in alkali resistance, oil and grease properties.
PA12 can be processed by injection, extrusion, blow molding, rotating and other forming methods, and can be processed into sheet, bar, pipe, parts, film, monofilament and other parts. Can be used to make various industrial precision parts and manufacture gears, bearings, screws, syringes, tool handles, hoses, cold-resistant tubing, pressure-resistant tube wire and cable sheathing, wrap to fiber jacket and insulation parts, waterproof containers, Valves, etc., can also be used to make packaging films for tubes, rods, plates, food and pharmaceuticals, and can be used in the weapon industry for elastic bands and other components.
Contact Now
Tina Lin
Email : ###
评价
目前还没有评价