描述
尼龙12原材料颗粒耐高温
聚酰胺12用于燃油管无毒无味，使用寿命长
聚酰胺12柔韧性极佳，倒角半径小
聚酰胺12颜色和规格可根据客户定制
聚酰胺12符合ROHS环境保护认证
聚酰胺12化学性能优异，压力损失小
聚酰胺12度硬度稳定，抗爆性能好
聚酰胺12尼龙管重量轻，工作温度和工作压力范围为：-20至+70度
PA12原材料颗粒耐高温
产品细节
PA12原材料颗粒耐高温
丁二烯半结晶热塑性材料。其特性与PA11相似，但晶体结构不同。PA12具有良好的耐腐蚀性和化学稳定性。PA12在增塑性能和增强性能方面有许多改进品种。与PA6和PA66相比，这些材料具有更好的性能和其他工艺条件。PA12聚酰胺12或尼龙12典型应用：水表和其他商业设备、电缆套管、机械凸轮、滑动机构和轴承等。PA12是一种由丁二烯制成的线性半结晶热塑性材料。其特性与PA11相似，但晶体结构不同。PA12是一种良好的电气绝缘体，不会像其他聚酰胺那样因潮湿而影响绝缘性能。它具有良好的抗冲击性和化学稳定性。PA12在增塑性能和增强性能方面有许多改进品种。与PA6和PA66相比，这些材料具有更低的熔点和密度，以及非常高的回潮率。PA12不耐强氧化性酸。PA12的粘度主要取决于湿度、温度和储存时间。它是非常流动的
注射模工艺条件：
干燥处理：加工前确保湿度低于0.1%。如果材料储存在空气中，建议在85℃的热空气中干燥4至5小时。如果材料储存在封闭容器中，则可在温度平衡3小时后直接使用。PA12尼龙12弹性体具有优异的噪音和振动阻尼。在干燥运行条件下，对钢、POM、PBT等材料具有较低的滑动摩擦系数，具有优异的耐磨性和较高的体积稳定性。由于这些特性，本产品特别适用于无声齿轮，如DVD、CD、MD、VCR、摄像机、数码相机、打印机和录像机
聚酰胺12弹性体（尼龙12弹性体）是一种热塑性弹性体（TPE）材料。它是一种嵌段聚合物，包括PA12段和聚醚段（聚醚嵌段酰胺）。富含PA12的产品具有PA12的主要性能，随着聚醚含量的增加，弹性体的性能变得更加明显：即聚合物变得更柔软，具有更高的低温冲击强度。由于其优异的性能，这种聚合物在许多应用中不可或缺
由于PA12原材料颗粒具有耐高温性，因此，因此，现在
<
是耐高温pa12原材料颗粒的专业制造商之一，您可以从我们工厂以优惠的价格订购高质量的耐高温pa12原材料颗粒
PA12 Raw Material Particles Are Resistant To High Temperature
Polyamide 12 for Fuel pipe Non-toxic, tasteless , long service life .
Polyamide 12 Excellent flexibility, the bevelling radius is small .
Polyamide 12 The color and specification can be customer-tailored .
Polyamide 12 Conform to ROHS environmental protection recognition .
Polyamide 12 Excellent chemical property, small pressure loss .
Polyamide 12 Degree of hardness is stable, good antiknock characteristic.
Polyamide 12 PA12 NYLON TUBE has light weight ,working temperature and working pressure range is:-20 to +70 degree.
PA12 Raw Material Particles Are Resistant To High Temperature
Product Details
PA12 raw material particles are resistant to high temperature
semi-crystalline-crystalline thermoplastic material from butadiene. Its characteristics are similar to PA11, but the crystal structure is different. PA12 is a good resistance and chemical stability. There are many improved varieties of PA12 in terms of plasticizing properties and strengthening properties. Compared with PA6 and PA66, these materials have and other process conditions. PA12 Polyamide 12 or nylon 12 Typical applications: water meters and other commercial equipment, cable sleeves, mechanical cams, sliding mechanisms And bearings, etc. PA12 is a linear, semi-crystalline-crystalline thermoplastic material from butadiene. Its characteristics are similar to PA11, but the crystal structure is different. PA12 is a good electrical insulator and will not affect the insulation performance due to moisture like other polyamides. It has good impact resistance and chemical stability. There are many improved varieties of PA12 in terms of plasticizing properties and strengthening properties. Compared with PA6 and PA66, these materials have a lower melting point and density, and a very high moisture regain. PA12 has no resistance to strong oxidizing acids. The viscosity of PA12 mainly depends on humidity, temperature and storage time. It is very fluid.
Injection mold process conditions:
Drying treatment: Ensure that the humidity is below 0.1% before processing. If the material is stored in the air, it is recommended to dry it in hot air at 85C for 4 to 5 hours. If the material is stored in a closed container, it can be used directly after 3 hours of temperature equilibrium. PA12 nylon 12 elastomer has excellent noise and vibration damping. Under dry running conditions, it has low sliding friction coefficient for steel, POM, PBT and other materials, excellent wear resistance and high volume stability. Because of these properties, this product is especially suitable for silent gears such as DVD, CD, MD, VCR, camcorders, digital cameras, printers and video recorders.
Polyamide 12 elastomer (nylon 12 elastomer) is a thermoplastic elastomer (TPE) material. It is a block polymer, including PA12 segment and polyether segment (polyether block amide). Products rich in PA12 have the main properties of PA12, and the properties of elastomers become more obvious with the increase of polyether content: that is, the polymer becomes softer and has higher low-temperature impact strength. Due to its excellent properties, this polymer is indispensable in many applications.
Contactnowformoredetailsabout PA12 raw material particles are resistant to high temperature.
Kitty Liu< ###>
………………………………………………………………………………………………………………………………………………………………………………………
is one of the professional pa12 raw material particles are resistant to high temperature manufacturers, you can order high quality pa12 raw material particles are resistant to high temperature at good price from our factory.
评价
目前还没有评价