描述
齿轮用耐磨Pa46树脂
PA12塑料材料
良好的抗冲击性机器化学稳定性
良好的耐磨性、自润滑性和耐溶剂性
免费样品和快递
齿轮用耐磨Pa46树脂
产品细节
耐磨性齿轮用PA46树脂
聚酰胺46加工条件
聚酰胺本质上是吸湿性的，因此在打开时容易吸收水分。因此，强烈建议聚酰胺46在加工前在80°C下干燥2-8小时。这确保不会发生水解降解。目标含水量应最大为0.1%。对于关键应用，建议含水量为0.05%或更低。在这种情况下，建议在80-105°C下预干燥颗粒24-100小时。
聚酰胺46/PA46/尼龙46可在标准往复式螺杆注射成型机上加工
建议L/D比至少为20
熔体温度应在300-330°C之间
模具温度应在60-120°C之间。
聚酰胺46不会粘附在模具表面，并具有良好的喷射性能
是齿轮制造商的专业耐磨pa46树脂之一，您可以从我们工厂以优惠的价格订购优质耐磨pa46树脂
Wear Resistance Pa46 Resin For Gear
.
PA12 Plastic Material
Good impact resistance machine chemical stability
Good wear resistance, self-lubricating and solvent resistance
Free Sample and express delivery
Wear Resistance Pa46 Resin For Gear
Product Details
wear resistancepa46 resin for gear
Polyamide 46 Processing Conditions
Polyamides are hygroscopic in nature and hence tend to absorb moisture when left in open. It is therefore highly recommended to dry Polyamide 46 for 2-8 h at 80°C before processing. This ensures that hydrolytic degradation does not occur. Target moisture content should be a maximum of 0.1%. For critical applications, the recommended moisture content is 0.05% or less. In this case, it is recommended to pre-dry pellets 24-100 h at 80-105°C.
Polyamide 46/PA46/Nylon 46 can be processed on standard reciprocating screw injection molding machines.
An L/D ratio of at least 20 is recommended.
Melt temperature should lie between 300-330°C
Mold temperature should be in the range of 60-120°C.
Polyamide 46 does not stick to the mold surface and has good ejection properties.
is one of the professional wear resistance pa46 resin for gear manufacturers, you can order high quality wear resistance pa46 resin for gear at good price from our factory.
评价
目前还没有评价