描述

医用级PA66塑料

高温、高强度、阻燃、增韧、抗寒-40摄氏度

PA66塑料医用级

产品详细信息

PA66医用塑料级

熔化温度：261~291C。玻璃添加剂的产品温度为276~279℃。熔化温度应避免高于298℃

模具温度：建议为81摄氏度。模具温度会影响结晶度，结晶度会影响产品的物理性能。对于薄壁塑料零件，如果使用低于41℃的模具温度，塑料零件的结晶度将随时间变化。为了保持塑料零件的几何稳定性，需要进行退火处理

注射压力：通常为751~1251bar，取决于材料和产品设计

注射速度：高速（增强材料略低）

是专业的pa66医用塑料级制造商之一，您可以从我们工厂以优惠的价格订购高品质的pa66医用塑料级

PA66 Plastic Medical Grade

High temperature,
high strength,
fire retardant，
Toughening,
anti-cold -40 degrees centigrade.

PA66 Plastic Medical Grade

Product Details

PA66 plastic medical grade

Melting temperature: 261~291C. The glass additive products are 276~279C. The melting temperature should be avoided higher than 298C.

Mold temperature: 81C is recommended. The mold temperature will affect the crystallinity, and the crystallinity will affect the physical properties of the product. for

For thin-walled plastic parts, if a mold temperature lower than 41C is used, the crystallinity of the plastic parts will change over time. In order to maintain

The geometric stability of plastic parts requires annealing treatment.

Injection pressure: usually 751~1251bar, depending on the material and product design.

Injection speed: high speed (slightly lower for reinforced materials).

Contactnowformoredetailsabout PA66 plastic medical grade for syringe.

Kitty Liu< ###>

is one of the professional pa66 plastic medical grade manufacturers, you can order high quality pa66 plastic medical grade at good price from our factory.