描述

PPS 20%玻璃纤维为等级

PPS聚苯硫醚树脂具有
1、优异的耐热性，
2、良好的阻燃性，
3、优异的耐化学性，
4、PPS树脂+玻璃纤维具有较高的机械强度，
5、极低的成型收缩率，
6、良好的流动性

PPS 20%玻璃纤维，用于水平

产品详细信息PPS 20%玻璃纤维用于PPS（聚苯硫醚）树脂，密度为1。每立方厘米3-1.8克，聚苯硫醚具有非常好的热性能。加入玻璃纤维增强的聚苯硫醚具有较高的热性能指标，并经过5000℃的热老化5000小时，如玻璃纤维、碳纤维、填料等。为了提高其力学性能，改性后的聚苯硫醚可用于长期的工作负荷和热负荷。在作用下保持高机械性能和尺寸稳定性，可用于高温环境。PPS 20%玻璃纤维的物理性能：PPS 20%玻璃纤维的电气绝缘性能（尤其是高频绝缘性能）非常优异，白色坚硬易碎，金属声音落在地上，透光率仅次于有机玻璃，着色耐水性，化学稳定性。它具有优异的阻燃性，是不可燃的塑料。PPS 20%玻璃纤维，强度一般，刚度很好，但脆性容易产生应力脆性断裂；它不耐苯和汽油等有机溶剂；长期使用温度可达260度，在400度空气或氮气中稳定。加入玻璃纤维或其他增强材料进行改性后，冲击强度大大提高，耐热性等力学性能也得到改善，密度提高到1.6-1.9，成型收缩率小到0.15-0.25%。用于制造耐热零件、绝缘零件和化学仪器、光学仪器等零件。PPS 20%玻璃纤维目前，我厂有PPS、尼龙6/66/12、TPU、PMMA、POM、PBT、PC.ABS、PEEK、PEI。耐磨、耐油、高透明度、高弹性、耐化学性、耐高温、耐低温、高柔韧性、耐水解、纤维添加、纤维碳纤维、抗菌、抗静电、抗紫外线、耐老化、导电。绝缘、阻燃、抗静电、高抗拉强度等规格

您想要什么类型的材料？你在做什么产品？具体要求和特点是什么？目前遇到了哪些无法解决的技术难题？请告诉我们您需要的信息，我们将结合现有的材料应用案例，一起分析，为您推荐最合适的材料，减少弯路，节省时间和成本！试产成功！PA66+60%玻璃纤维

关于PPS+20%玻璃纤维的任何问题，请直接与我们联系

立即联系：特蕾西###

PPS 20% Glass Fiber For Level

PPS Polyphenylenesulphide resin Features
1, Excellent heat resistance,
2, Good flame retardant,
3, Excellent chemical resistance,
4, PPS resin+glass fiber has high mechanical strength,
5,Extremly small molding shrinkage rate,
6, Good fluidity.

PPS 20% Glass Fiber For Level

Product Details

PPS 20% glass fiberfor level

PPS（Polyphenylenesulphide）resin , density is1.3-1.8 grams per cubic centimeter, pps has very good thermal properties. The addition of glass fiber reinforced has higher thermal performance index, and after 5,000 degrees Celsius heat aging for 5000 hours, such as glass fiber, carbon fiber, filler, etc. to enhance its mechanical properties, the modified pps can be used in long-term workload and heat load. Maintaining high mechanical properties and dimensional stability under action, it can be used in high temperature environments.PPS 20% glass fiber

Physical properties:PPS 20% glass fiber

1, electrical insulation (especially high-frequency insulation) is excellent, white is hard and brittle, falling on the ground with metal sound, light transmittance is second only to plexiglass, coloring water resistance, chemical stability. It has excellent flame retardancy and is non-combustible plastic.PPS 20% glass fiber

2, the strength is general, the rigidity is very good, but the brittleness is easy to produce stress brittle fracture; it is not resistant to organic solvents such as benzene and gasoline; the long-term use temperature can reach 260 degrees, and it is stable in 400 degrees of air or nitrogen. After being modified by adding glass fiber or other reinforcing materials, the impact strength can be greatly improved, heat resistance and other mechanical properties are also improved, the density is increased to 1.6-1.9, and the molding shrinkage is as small as 0.15-0.25%. For the manufacture of heat-resistant parts, insulation parts and chemical instruments, optical instruments and other parts.PPS 20% glass fiber

PPS 20% glass fiber

At present, my factory has PPS,Nylon6/66/12,TPU,PMMA, POM, PBT,PC.ABS,PEEK,PEI. wear resistance, oil resistance, high transparency, high elasticity, chemical resistance, high temperature resistance, low temperature resistance, high flexibility, hydrolysis resistance, fiber addition, fiber carbon fiber, antibacterial, antistatic, anti-UV resistance, aging, electricity. Insulation, flame retardant, antistatic, high tensile strength and other specifications.

What type of material are you looking for? What products are you doing? What are the specific requirements and characteristics? What technical difficulties are currently encountered that cannot be solved? Please tell us the information you need, we will combine the existing material application cases, analyze together, recommend the most suitable materials for you, reduce detours and save time and cost! A trial production was successful!PA66+60% glass fiber

Any questions about PPS+20%gf glass fiber,please contact us directly.

Contact Now：Tracy <###>