描述
SGS批准的PPS GF33树脂
1热稳定性好，长期使用温度可达220-240℃，载荷下挠度温度1.82Mpa在260℃以上
2阻燃性好，PPS在不使用任何阻燃剂的情况下，可达到UL94 V-0和5-V标准，燃烧时烟雾量很小
三,。优异的耐化学性，优于除PTFE以外的任何其他塑料，不溶于除强氧化性酸以外的任何有机溶剂
四,。极低的成型收缩率、吸水率和线膨胀系数，即使在高温高湿环境下也能保持良好的尺寸稳定性
SGS批准的PPS GF33树脂
产品详细信息
SGS批准的PPS GF33树脂
SGS Aprroved PPS GF33 Resin
.
1 Good heat stability, the long-term using temperature can be 220-240°C and the deflection temperature under load 1.82Mpa is above 260°C;
2 Good flame resistance, PPS can meet the UL94 V-0 and 5-V standard without any flame retardants and the amount of smoke is very little when it is burning;
3.Excellent chemical resistance, better than any other plastics except PTFE, insoluble in any organic solvent except strong oxidizing acids.
4.very low molding shrinkage, low water absorption and linear expansion coefficient, keeping excellent dimensional stability even in the high temperature and humidity environ
SGS Aprroved PPS GF33 Resin
评价
目前还没有评价