描述

低粘度尺寸稳定性POM GF25

产品：低粘度尺寸稳定性POM GF25

高耐磨性

低摩擦系数

高耐热性

良好的电气和介电性能

低吸水性

低粘度尺寸稳定性POM GF25

产品详细信息

低粘度尺寸稳定性POM GF25

特点

（1）缩醛聚缩醛树脂加工前无需干燥。最好在加工过程中预热（约80°C），这有利于产品的尺寸稳定性

电子邮件：#####

是专业的低粘度尺寸稳定性pom gf25制造商之一，您可以从我们工厂以优惠的价格订购高质量低粘度尺寸稳定性pom gf25

Low Viscosity Dimensional Stability POM GF25

Product : Low viscosity Dimensional stability POM GF25
High abrasion resistance
Low coefficient of friction
High heat resistance
Good electrical and dielectric properties
Low water absorption

Low Viscosity Dimensional Stability POM GF25

Product Details

Low viscosity Dimensional stability POM GF25

Features

(1)Acetal Polyacetal Resindoes not need to be dried before processing. It is best to preheat (about 80°C) during processing, which is good for the dimensional stability of the product.

(2) The processing temperature of Acetal Polyacetal Resin is very narrow (0～215℃), it will decompose when it stays in the barrel for a long time or the temperature exceeds 220℃, and produce strong irritating formaldehyde gas.

(3) The holding pressure of Acetal Polyacetal Resin material should be large (close to the injection pressure) to reduce the pressure drop. The screw speed should not be too high and the residual volume should be small;

(4) Acetal Polyacetal Resin products have a large shrinkage rate, which is easy to shrink or deform. POM has a large specific heat and a high mold temperature (80～100℃). The product is very hot when it is demolded. It is necessary to prevent burning fingers.

(5) Acetal Polyacetal Resin should be molded and processed under the conditions of “medium pressure, medium speed, low material temperature, and higher mold temperature”, and mold temperature control is required when precision products are molded.

Contact Now ForLow viscosity Dimensional stability POM GF25.

Tina Lin < Email : ###>

is one of the professional low viscosity dimensional stability pom gf25 manufacturers, you can order high quality low viscosity dimensional stability pom gf25 at good price from our factory.