描述

增强尼龙66塑料材料

高温、高强度、阻燃、增韧、抗寒-40摄氏度

增强尼龙66塑料材料

产品详细信息

增强尼龙66塑料材料

增强尼龙66产品的介绍如下：

PA66的熔点（Tm）是晶体熔化的温度。pa66增强尼龙、结晶聚合物尼龙66和pa66增强尼龙的生产过程显示出明显的熔点。根据所用的测试方法，熔点在259~267℃范围内波动。通常通过差热分析（DTA）测量尼龙66的熔点为264°C。事实上，尼龙66的熔点可以通过熔融热（ΔH）和结晶熔融熵（ΔS）计算得出：尼龙66的ΔH为4390.3 J/mol，ΔS为8.37 J/kmol，尼龙66增强尼龙颗粒，Tm为259.3℃。如果将体积膨胀系数显示最大值的温度视为熔点，尼龙66的熔点温度范围为246至263°C。接近259°C的理论熔点。

有关增强尼龙66塑料材料的详细信息，请联系我们

是专业的增强尼龙66塑料材料制造商之一，您可以从我们工厂以优惠的价格订购高品质的增强尼龙66塑料材料

Reinforced Nylon 66 Plastic Material

High temperature,
high strength,
fire retardant，
Toughening,
anti-cold -40 degrees centigrade.

Reinforced Nylon 66 Plastic Material

Product Details

Reinforced Nylon 66 Plastic Material

The introduction of reinforced nylon 66 products is as follows:

The melting point (Tm) of PA66 is the temperature at which the crystal melts. The production process of pa66 reinforced nylon, crystalline polymer nylon-66 and pa66 reinforced nylon shows a clear melting point. According to the test method used, the melting point is 259~267℃ fluctuate within the range. The melting point of nylon-66, usually measured by differential thermal analysis (DTA), is 264°C. In fact, the melting point of nylon-66 can be calculated from the heat of fusion (ΔH) and the entropy of fusion (ΔS) of crystallization: ΔH of nylon-66 is 4390.3 J/mol, ΔS is 8.37 J/kmol, pa66 reinforced nylon particles, Tm The theoretical value of 259.3 ℃. If the temperature at which the volume expansion coefficient shows a maximum value is regarded as the melting point, the melting point temperature of nylon-66 ranges from 246 to 263°C. Close to the theoretical melting temperature of 259 °C.

Contactnowformoredetailsabout reinforced nylon 66 Plastic Material.

is one of the professional reinforced nylon 66 plastic material manufacturers, you can order high quality reinforced nylon 66 plastic material at good price from our factory.