描述

导电抗静电POM性质

1）POM 20%玻璃纤维，具有优异的机械强度

2）POM 20%玻璃纤维，用于承载高硬度强度

3）POM 20%玻璃纤维，具有高耐磨性

4）轴承自润滑用POM 20%玻璃纤维

5）POM 20%玻璃纤维，用于承载更高的模量

6）POM 20%玻璃纤维，用于耐化学腐蚀等。

导电抗静电聚甲醛性质

产品细节

导电抗静电聚甲醛的性质

1。机械强度和刚度高；2.最高疲劳强度；3.良好的耐环境性和耐有机溶剂性

4。抗反复冲击能力强；5.温度范围宽（-40℃~120℃）；6.良好的电气性能

7。恢复性好；8.自润滑，耐磨性好；9.良好的尺寸稳定性

聚甲醛成型条件及注意事项：

导电抗静电聚甲醛性质：

1）注射温度：

在正常情况下，当注射温度高于熔点20~30℃时，不仅综合物理机械性能良好，但在这个温度下，表面可以是干净光滑的

理想的注射温度控制在190~200℃之间。对于薄壁产品，可将温度提高至210°C进行加工

不仅不能改善材料的流动性，还可能导致材料分解

3）注射速度：

如果注射速度慢，将发生不良焊接。快速注射用于薄壁产品

料 腐烂。在确保产品质量和熔体流动性的情况下，应尽可能使用较低的成型温度和较短的成型周期。POM产品

后处理以空气或油为介质进行。温度140~150℃，时间3~5h

是一家专业的导电防静电pom性质制造商，您可以从我们工厂以优惠的价格订购高品质的导电防静电pom性质

Conductive Anti-static POM Nature

1)POM 20% Glass Fiber for Bearing Excellent mechanical strength;
2)POM 20% Glass Fiber for Bearing High hardness strength;
3)POM 20% Glass Fiber for Bearing High wear resistance;
4)POM 20% Glass Fiber for Bearing Self-lubrication;
5)POM 20% Glass Fiber for Bearing Higher modulus;
6)POM 20% Glass Fiber for Bearing Chemical resistance and etc.

Conductive Anti-static POM Nature

Product Details

Conductive anti-static POM nature

advantage

1. High mechanical strength and rigidity; 2. Highest fatigue strength; 3. Good environmental resistance and organic solvent resistance;

4. Strong resistance to repeated impact; 5. Wide temperature range (-40℃~120℃); 6. Good electrical properties;

7. Good restorability; 8. Self-lubricating and good wear resistance; 9. Excellent dimensional stability.

POM molding conditions and precautions:

Conductive anti-static POM nature

1) Injection temperature:

Under normal circumstances, when the injection temperature is 20~30℃ higher than the melting point, not only the comprehensive physical and mechanical properties are good, but the surface can be clean and smooth at this temperature.

It is ideal to control the injection temperature between 190~200℃. For thin-walled products, the temperature can be increased to 210°C for processing.

Not only cannot improve the fluidity of the material, but it may cause the decomposition of the material.

2) Injection pressure:

The injection pressure of POM plastic is related to the wall thickness of the product and the type of equipment. In order to ensure smooth demolding, the injection pressure should not be too high.

3) Injection speed:

If the injection speed is slow, poor welding will occur. Fast injection is used for thin-walled products.

4) Mold temperature:

The mold temperature is controlled at about 60~100℃.

5) Matters needing attention:

The production should be continuous. If the machine stops, the remaining material in the barrel should be drained to avoid material decomposition and product black spots when the temperature rises again. The molding temperature of POM is not

It is allowed to exceed 240℃, and the material will decompose quickly at this temperature. The material should not stay in the barrel above 190℃ for too long, otherwise it will cause material

料 decomposes. In the case of ensuring product quality and melt fluidity, a lower molding temperature and a shorter molding cycle should be used as much as possible. POM products

The post-treatment is carried out with air or oil as the medium. The temperature is 140~150℃, and the time is 3~5h.

Contactnowformoredetailsabout Conductive anti-static POM nature.

Kitty Liu< ###>

is one of the professional conductive anti-static pom nature manufacturers, you can order high quality conductive anti-static pom nature at good price from our factory.