描述

曲轴注射成型用PPS GF30 PPS树脂

产品名称：聚苯硫醚（PPS）

颜色：根据需要

优点：价格优惠、质量高、交货及时、免费样品、环保

无任何杂质

可使用30%至70%的玻璃纤维加固

包装：25kg/袋（也可定制）

曲轴注射成型用PPS GF30 PPS树脂

产品详细信息

曲轴注射成型用PPS GF30 PPS树脂

在上一节中，我们讨论了聚苯硫醚的一般特性。现在我们来谈谈聚苯硫醚材料的晶体结构和物理性质。聚苯硫醚是一种半结晶聚合物

单位晶胞为正变晶胞（a=0.867 nm，b=0.561 nm，c=1.026 nm）

根据热历史计算，理想PPS晶体的熔合热为112 J/g，分子量和交联状态（线性或非线性）结晶度范围为0.30%至0.45%

无定形和交联PPS可通过以下方式制备：

将材料加热至熔融温度以上

将其冷却至熔融温度以下约30°C，并且

在空气中保持数小时

是曲轴注塑制造商的专业pps gf30 pps树脂之一，您可以从我们工厂以优惠的价格订购用于曲轴注塑的优质pps gf30 pps树脂

PPS GF30 PPS Resin For Crankshaft Injection Molding

.
Product Name: PPS
Color : As required
Advantage: Competitive price, high quality, on-time delivery, free sample,Environment friendly
Without any impurity
Can be reinforced with the glass fiber from 30% to 70%
Packing : 25kg/bag(also customizable)

PPS GF30 PPS Resin For Crankshaft Injection Molding

Product Details

PPS GF30 PPS Resin for Crankshaft Injection Molding

In the above section, we discussed about the general characteristics of Polyphenylene sulfide. Now we talk Crystal Structure and Physical Properties of PPS Material

PPS is a semi-crystalline polymer.

The unit cell is orthorombic (a=0.867 nm, b=0.561 nm, c=1.026 nm)

The heat of fusion for an ideal PPS crystal was calculated as 112 J/g

Depending from thermal history, molecular weight and cross-linked status (linear or not) the degree of crystallinity ranges from 0.30 to 0.45%

Amorphous and crosslinked PPS can be prepared by:

Heating the material above the melting temperature

Cooling it to around 30°C below the melting temperature, and

Holding it for several hours in the presence of air

is one of the professional pps gf30 pps resin for crankshaft injection molding manufacturers, you can order high quality pps gf30 pps resin for crankshaft injection molding at good price from our factory.